The usual problem.
The Hi/Lo switch has broken off where the screw passes through.
Does anyone have a spare part from inside the left switchgear ?
Zpower sell them but they are out of stock just now.
Cheers
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
KZ900 Hi/Lo switch
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: KZ900 Hi/Lo switch
I assume that this part is common across many Kawasaki models of the time. Rummaging at an autojumble near you might pay dividends. You might ( say) find that the z200 had a similar high/ low switch that you could strip out . And because its not a sought after model, it might be only a pound or 2 from the seller, glad to be rid of it.
gray
Re: KZ900 Hi/Lo switch
https://www.ebay.com/itm/204974183999?_ ... R7ql7Ou3ZA
Trouble is, by time you have paid shipping you might as well buy a complete repro switch and cannibalise it
Trouble is, by time you have paid shipping you might as well buy a complete repro switch and cannibalise it
Re: KZ900 Hi/Lo switch
In the end I bought the replacement part on eBay. The part was considerably less than the shipping !
But hey ho, it’s fixed now.
Thanks
But hey ho, it’s fixed now.
Thanks
Who is online
Users browsing this forum: No registered users and 19 guests