Page 1 of 2
Short front mudguard in chrome or fibreglass for Z1R
Posted: Mon Feb 08, 2010 9:26 pm
Author: AndyZ1R
Hello all,
I am looking to replace the huge chrome front mudguard on my Z1R with either the short chrome type, or if anyone has a suitable fibreglass one (or can recommend what to buy?) then i may be interested in that as an alternative.
My bike has a standard front end on it with an 18'' front wheel, many thanks in advance.
Posted: Mon Feb 08, 2010 9:32 pm
Author: london calling
Andy,have a look about for the old RG500 type of front mudguard.
If you have a butcher's at Steve's (Moriwaki 1105) Z1R that's the type
Posted: Wed Feb 10, 2010 10:10 pm
Author: AndyZ1R
Cheers Jack, that could possibly do the job.
Posted: Wed Feb 10, 2010 10:19 pm
Author: AndyZ1R
Mind you, i`ve just been looking at the Zeds of Reading pics,
http://www.z1ownersclub.co.uk/forum/vie ... hp?t=13607
and the short chrome mudguards most of them have would be exactly what i`m after. Anyone know where to get one, or have one for sale?
Posted: Wed Feb 10, 2010 10:31 pm
Author: nigel bessant
Are they the same as the ones fitted to ltd's?
Short mudguard
Posted: Fri Feb 12, 2010 10:45 am
Author: Mick D
Hi Andy, think I've got a short fiberglass mudguard at home you can have if you want.
Let me know and i'll have a look.
Re: Short mudguard
Posted: Fri Feb 12, 2010 11:24 pm
Author: AndyZ1R
Mick D wrote:Hi Andy, think I've got a short fiberglass mudguard at home you can have if you want.
Let me know and i'll have a look.
Thanks Mick, yes i`d be interested, do you have a pic? And do you think it would fit a Zed?
z1r guard
Posted: Sun Feb 14, 2010 8:58 pm
Author: Mick D
It came off a Z, I'll try and get a photo as soon as I can.
Re: z1r guard
Posted: Mon Feb 15, 2010 9:12 pm
Author: AndyZ1R
Mick D wrote:It came off a Z, I'll try and get a photo as soon as I can.
Cheers Mick.
Posted: Fri Feb 19, 2010 10:36 am
Author: Gus
Posted: Fri Feb 19, 2010 12:36 pm
Author: kawman736582
hi here is a good company in the usa though beasley composites.com # 45 is standerd 5 inch wide $62.50 and # 46 is 4 and three eights wide for 18 inch $59.50 name is ben 800 745 5886 the took over for frp fiberglass specializing in dragbike bodys hope this helps cheers..steve
Posted: Fri Feb 19, 2010 9:32 pm
Author: AndyZ1R
Cheers Gus, well found! That`s the kind i was after if i couldn`t get a chrome one, so i`ve bought that to try it as it was quite cheap, cheers mate.
Steve, that Beasley Composites site has some good stuff on it too, wasn`t aware of them so many thanks for the info.
Mick, if you can get a pic i still may be interested, thanks all for your helpful replies.
Posted: Wed Mar 03, 2010 10:00 pm
Author: AndyZ1R
The Ebay one never turned up, and the guy hasn`t replied to my e-mail
. So i`m still after a front mudguard, preferably the short chrome type if anyone has one it would be much appreciated. 18'' front wheel by the way.
Posted: Wed Mar 03, 2010 11:18 pm
Author: Gus
Aparently these are all the same short mudguard.
KZ1000-B1 (KZ1000 LTD) (1977)
KZ1000-B2 (KZ1000 LTD) (1978)
KZ1000-B3 (KZ1000 LTD) (1979)
KZ1000-B4 (LTD) (1980)
KZ1000-G1 (Classic) (1980)
KZ1000-K1 (LTD) (1981)
KZ1000-K2 (LTD) (1982)
KZ1000-M1 (CSR) (1981)
KZ1000-M2 (CSR) (1982)
KZ1100-L1 (LTD Shaft) (1983)
KZ550-C1 (LTD) (1980)
KZ550-C2 (LTD) (1981)
KZ550-C3 (LTD) (1982)
KZ550-C4 (LTD) (1983)
KZ550-F2 (LTD Shaft) (1984)
KZ550-M1 (LTD Shaft) (1983)
KZ650-H1 (CSR) (1981)
KZ650-H2 (CSR) (1982)
KZ650-H3 (CSR) (1983)
KZ750-F1 (LTD Shaft) (1983)
KZ750-G1 (LTD II) (1980)
KZ750-H1 (LTD) (1980)
KZ750-H2 (LTD) (1981)
KZ750-H3 (LTD) (1982)
KZ750-H4 (LTD) (1983)
KZ750-K1 (LTD Belt) (1983)
KZ750-K2 (Canada Only) (1984)
KZ750-M1 (CSR Twin) (1982)
KZ900-B1 (LTD) (1976)
Good luck
Posted: Thu Mar 04, 2010 9:36 pm
Author: AndyZ1R
Cheers Gus!
