Z1OwnersClub GB

Kawasaki's Air Coooled Big Fours
http://z1ownersclub.co.uk/phpBB3/

S&S intermediate jets .033" and .036" wanted for the Drouin.

http://z1ownersclub.co.uk/phpBB3/viewtopic.php?f=3&t=14906

Page 1 of 1

S&S intermediate jets .033" and .036" wanted f

Posted: Fri Jul 22, 2011 12:50 pm
Author: zed1015
Help!
Bit of a long shot but has anyone got any S&S intermediate jets i can beg ,borrow or even buy :shock:
They are the same fitment for all the S&S range
Narrowed it down a bit now so only need .033" and .036"
Thanks in advance.
Rob.

Posted: Mon Jul 25, 2011 9:39 am
Author: stubby
rob i have some 0.9mm 1.00mm 1.1mm 1.2mm drills you can borrow to drill out your existing jets if you cannot source any larger ones.

Posted: Mon Jul 25, 2011 10:21 am
Author: zed1015
Thanks for the offer but i've already drilled out a spare jet to the S&S max size of .040" (1mm) which has eliminated the problem i had which was caused by too small an intermediate .
I now need a selection of jets so that i can work down from the very rich condition i have now.
Cheer's.
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/
, Allan Style © http://forum-gta.com/ & http://x-tk.ru/ & http://zumaclub.ru/