Z1OwnersClub GB

Wotcha!

Does anybody have a front engine bolt (92091022) to sell for a Z1B.

My Zed did have crash bars fitted which I am removing and I would dearly love to get the proper bolt for the engine mount at the front.

Cheers,

Andrew

Part is NLA but various suppliers sell stainless replicas if you're not worried about originality

z2.john wrote:Part is NLA but various suppliers sell stainless replicas if you're not worried about originality

Now that is my kinda bolt!!!

Thanks for the advice. Do you have any names for the suppliers? Also I tracked down a front engine bolt of a Z1000 1978 would that be the same as the Z1B bolt?

Z1000 bolt should be the same but go for stainless and Inox Fasteners are good,

http://www.inoxbolt.co.uk/zen/

Thank you, they guy was wanting £20 plus postage for the Z1000 bolt, seems a little pricy to me.

I know INOX they are really helpfull and I have bought a lot of bolts etc from john a long time ago when I was changing out stock for stainless on my ZXR. Being a Magpie i kept all the old bolts. I am so glad I did as I will get the ZXR back to standard one day..........

Cheers, Andrew

I may have one does anyone know the length it should be as i have a few spare ones but not sure which is which

M10x315mm

Is this the one

looks very close. measure from under the head to the end of the thread to be precise

I thought the Kawasaki sizes were overall this bolt measures 315mm overall from under the head it is less.

In Z-Power parts book its 310mm and that probably excludes the head.

just looked through my my genuine Kawasaki part no ref book + it does state the bolt is 310mm long. sorry if my previous reply was misleading

Looks like this is the one then.

All's well that ends well.

Yes I would agreed that certainly looks the part and that tallies with my part reference book.

Is the bolt for sale?

Regards,

Andrew