As it says, I would like a set of standard steel engine mounting plates for a Z1000.
I'm presuming A1/A2 are the same as the Ltd.
Also need the spacer for the rear mount as that is shortened to fit the ally plates on my bike.
Ally plates could be up for trade - see Pigford's Z1000 build thread -
http://www.z1ownersclub.co.uk/forum/vie ... c&start=90
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
standard engine plates
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- ZedHead
- Posts: 1128
- Joined: 11th Sep 2012
- Location: Reading
- Contact:
standard engine plates
Cheers,
Mark.
Mark.
-
- ZedHead
- Posts: 1128
- Joined: 11th Sep 2012
- Location: Reading
- Contact:
Who is online
Users browsing this forum: No registered users and 85 guests