Hi Guys, I'm looking to buy a swing arm pivot bolt if anyone has one spare. It will be getting restored/re-plated so any condition will be Ok.
Cheers Dave
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1 swing arm pivot bolt
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Z1 swing arm pivot bolt
Is z750e the same
Re: Z1 swing arm pivot bolt
Not sure Swirl but the part number is 33032-036
M16 x about 315mm long. The head is hex except the early Z1s which are round with two flats on them. Either will do but the later ones with a flanged hex head used on the thous 77 onwards is no good for my Z1B resto.
All the above have the same part number though I think. Just the part got superceded a couple of times.
M16 x about 315mm long. The head is hex except the early Z1s which are round with two flats on them. Either will do but the later ones with a flanged hex head used on the thous 77 onwards is no good for my Z1B resto.
All the above have the same part number though I think. Just the part got superceded a couple of times.
Who is online
Users browsing this forum: No registered users and 24 guests