Page 1 of 2
4 main terminal blocks
Posted: Wed Apr 26, 2017 8:37 pm
Author: Big Fluff
I need to replace the four coloured terminal blocks on a customers Z1R-TC as they're held together with cable ties!
I'm talking about the white, blue, brown and green connector housings beneath the LH side panel.
I've done a search and it looks like Z-Power and VWP no longer offer them.
Can anyone help please?
Will
Re: 4 main terminal blocks
Posted: Wed Apr 26, 2017 8:39 pm
Author: paul doran
Will I should have I am off tomorrow so I will take a look
Re: 4 main terminal blocks
Posted: Wed Apr 26, 2017 8:54 pm
Author: z1bman
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 10:43 am
Author: Big Fluff
Thanks Paul. It's actually the female sockets I need; namely the brown socket from the main harness and the white socket from the rectifier, so the link harness that Z1Bman posted won't do unfortunately.
I will post a picture later.
Regards Will
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 2:01 pm
Author: ZedHead
I have tried all over to find the female plugs. So far to no avail
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 2:20 pm
Author: Kwackman
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 2:26 pm
Author: KeithZ1R
how good do they need to be and do they need the wiring attached ?
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 4:57 pm
Author: DavidZ1R
I searches in vain for them will, could not find anywhere, if you find any let me know please.
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 6:54 pm
Author: Coose
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 9:27 pm
Author: Big Fluff
KeithZ1R wrote:how good do they need to be and do they need the wiring attached ?
They just need to be unbroken. I can easily remove the terminals so no wires needed. Hope you can help, just need the brown and white female socket housings. Thanks
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 9:29 pm
Author: Big Fluff
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 10:04 pm
Author: Jay1969
Re: 4 main terminal blocks
Posted: Thu Apr 27, 2017 10:08 pm
Author: z1bman
you need to get a scrap or used harness & rectifier with good block connectors other than buying new you will struggle to find them
Re: 4 main terminal blocks
Posted: Fri Apr 28, 2017 8:03 am
Author: paul doran
Can You put up a picture Will
Re: 4 main terminal blocks
Posted: Fri Apr 28, 2017 8:12 am
Author: KeithZ1R
Big Fluff wrote:KeithZ1R wrote:how good do they need to be and do they need the wiring attached ?
They just need to be unbroken. I can easily remove the terminals so no wires needed. Hope you can help, just need the brown and white female socket housings. Thanks
ive some somewhere
I will look when I get back home at weekend and get back to you