Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1100R carbs.
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Z1100R carbs.
I shall ask the gent if he still has them.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: Z1100R carbs.
soz the 33's have gone but he does still have a set of vm28's.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: Z1100R carbs.
Thanks for checking .... would the 28s be a bit small on my 1000 ?
Re: Z1100R carbs.
Interestingly 34 and 36 rs use the same needle jets apparently.
I chose 34 because I spend most of my time at low speed rather than full throttle.
Super clean carburation out of the box and no apparent loss of top end. 127 rear wheel hp ain't too shabby.
I do not recognise what Al says about the low speed issues apart from the clatter they make.
See how they run https://youtu.be/1mYrZSd53qM
I chose 34 because I spend most of my time at low speed rather than full throttle.
Super clean carburation out of the box and no apparent loss of top end. 127 rear wheel hp ain't too shabby.
I do not recognise what Al says about the low speed issues apart from the clatter they make.
See how they run https://youtu.be/1mYrZSd53qM
Asphalt Cowboy Z1100R, 1981 Z1000J
Re: Z1100R carbs.
Hi I know this is an old post but appreciated
I'm thinking of rs34 for my z1100r it's standard motor with Harris pipe
Any idea what main jet to use and air filters looking to try and get this set up quickly and easily regards richy..
I'm thinking of rs34 for my z1100r it's standard motor with Harris pipe
Any idea what main jet to use and air filters looking to try and get this set up quickly and easily regards richy..
Who is online
Users browsing this forum: No registered users and 65 guests