Looking for a rear master cylinder for a Z1000-A1
1977/78 era. Got to be in good condition especially
the plastic body can restore the rest.
Drip me a pm if you have one to sell.
Cheers Mike
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000-A1/2 Rear Master Cylinder
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
DogsbolloxofZ1B
- Hardcore
- Posts: 1440
- Joined: 28th Feb 2006
- Location: Near Chichester
-
AL MARSHALL
- 100Club
- Posts: 241
- Joined: 13th Feb 2007
- Location: BURTON ON TRENT/ TAMWORTH
Re: Z1000-A1/2 Rear Master Cylinder
Hi Mike , I have one that is complete with no damage , the piston is free, but don't know if it works ok or not. pm me if you are interested. Regards Al
trouble.......seek and ye shall find
www.z-clocks.co.uk
www.z-clocks.co.uk
-
DogsbolloxofZ1B
- Hardcore
- Posts: 1440
- Joined: 28th Feb 2006
- Location: Near Chichester
Re: Z1000-A1/2 Rear Master Cylinder
Hi Al,
Sorry for the delay in responding, I struggle with this necsite layout
doesn't work properly on an iphone.
Yes def interested, could you send me your MOB
again and I'll call you.
Cheers Mike
(07802 627071)
Sorry for the delay in responding, I struggle with this necsite layout
doesn't work properly on an iphone.
Yes def interested, could you send me your MOB
again and I'll call you.
Cheers Mike
(07802 627071)
Who is online
Users browsing this forum: No registered users and 16 guests