Page 1 of 1
Sprocket cover allen bolts
Posted: Wed Jun 14, 2017 11:08 pm
Author: Jay1969
As title, just the sprocket cover bolts please.
Re: Sprocket cover allen bolts
Posted: Thu Jun 15, 2017 8:25 am
Author: freddyz1r
Jay, you might as well just go to your local bolts /fasteners suppliers. I use 'bapp for bolts' up here and they stock almost everything you might want (everything is not always in stock). Including cap heads in stainless for literally a few pounds for a big handful. Last year I went down with a big shopping list of sizes and quantities I wanted, which ended up filling a small carrier bag for £20.
Cheers freddy
Re: Sprocket cover allen bolts
Posted: Thu Jun 15, 2017 9:27 am
Author: Jay1969
I don't know the lengths I want as I don't have the originals.
Re: Sprocket cover allen bolts
Posted: Thu Jun 15, 2017 9:30 am
Author: needaz1100r
Jay1969 wrote:I don't know the lengths I want as I don't have the originals.
Put a screwdriver through the hole in the case to measure the depth of the hole, and add on 10-15mm.
An allen bolt length is from the base of the head, i.e. where it presses on the case, to the end of the thread.
A countersunk bolt is from the top of the head, but that won't concern you with these.
Re: Sprocket cover allen bolts
Posted: Thu Jun 15, 2017 9:45 am
Author: Gus
2x 125mm
2x 70mm
Re: Sprocket cover allen bolts
Posted: Thu Jun 15, 2017 9:54 am
Author: Jay1969
Cheers Gus
Re: Sprocket cover allen bolts
Posted: Thu Jun 15, 2017 9:58 am
Author: needaz1100r
Gus wrote:2x 125mm
2x 70mm
...or ask someone who knows
Re: Sprocket cover allen bolts
Posted: Thu Jun 15, 2017 9:59 am
Author: Jay1969
I appreciate all the input, thanks
Re: Sprocket cover allen bolts
Posted: Thu Jun 15, 2017 1:38 pm
Author: needaz1100r
Jay1969 wrote:I appreciate all the input, thanks
It wasn't a dig matey