Hi,
I need a replacement head for a KZ1000A1, mine has a big crack in it. I'd consider anything, happy to get things fixed / cleaned if needed, just want to get on with my project. I'm also not expecting a bargain, happy to pay a proper price for condition. Hoping one (or several) of you great blokes has something secreted round the back....
Ever hopeful.... Russ
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
A Head for a Z1000A1/2 please......
Moderators: chrisu, paul doran, Taffus, KeithZ1R
A Head for a Z1000A1/2 please......
Z650C2, B1, F1, ZX9R, Z1000A1
Re: A Head for a Z1000A1/2 please......
Are you sure the crack can't be welded?
is it between the ports?
is it between the ports?
Re: A Head for a Z1000A1/2 please......
Hi Gary,
It's between the plug hole and the port. It tracks quite a way up the plug thread, about 2/3rds up in fact. It could be welded but they reakon it's uneconomical. I was going to replace the valve guides and seats but to fix the crack as well they advised I'd be best looking for another head first.
It's between the plug hole and the port. It tracks quite a way up the plug thread, about 2/3rds up in fact. It could be welded but they reakon it's uneconomical. I was going to replace the valve guides and seats but to fix the crack as well they advised I'd be best looking for another head first.
- Worst crack
Last edited by RussG on Wed Jul 05, 2017 5:10 am, edited 1 time in total.
Z650C2, B1, F1, ZX9R, Z1000A1
-
paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Who is online
Users browsing this forum: No registered users and 22 guests