Page 1 of 1
Z900 - 27mm Axle Wrench
Posted: Sun Aug 06, 2017 9:08 am
Author: Andrew_s
Does anyone have a good condition Z900 27mm axle wrench for sale - must have the big K logo and not be in the US unless the shipping is reasonable.
Please PM me if you do, thanks.
Re: Z900 - 27mm Axle Wrench
Posted: Sun Aug 06, 2017 3:01 pm
Author: tlc
I've actually got a couple just like that but assuming it's for a Z900? that would be wrong.
The Z900/1000 use upper case letters.
Re: Z900 - 27mm Axle Wrench
Posted: Sun Aug 06, 2017 4:05 pm
Author: Bill Newman
tlc wrote:I've actually got a couple just like that but assuming it's for a Z900? that would be wrong.
The Z900/1000 use upper case letters.
+1
The wrench in the first post is likely to be '80s vintage. Genuine Z/KZ wrench will be capital K logo and upper case name, plus size indicated vertically.
Re: Z900 - 27mm Axle Wrench
Posted: Sun Aug 06, 2017 4:56 pm
Author: Andrew_s
tlc wrote:I've actually got a couple just like that but assuming it's for a Z900? that would be wrong.
The Z900/1000 use upper case letters.
Thanks both, poor example used (deleted) - here's the one (deleted again
), same as tlc's, do you happen to have one going spare?
Re: Z900 - 27mm Axle Wrench
Posted: Sun Aug 06, 2017 5:16 pm
Author: tlc
Not one that is correct for a 900
Re: Z900 - 27mm Axle Wrench
Posted: Sun Aug 06, 2017 8:01 pm
Author: Andrew_s
tlc wrote:Not one that is correct for a 900
I'm not doing very well here at recognising capital letters!
tlc - is one of your spares for sale?
Re: Z900 - 27mm Axle Wrench
Posted: Sun Aug 06, 2017 8:06 pm
Author: tlc
I'll need to have a rummage and make sure I'm covered for 2 kits.
I'll get back to you.
Re: Z900 - 27mm Axle Wrench
Posted: Mon Aug 07, 2017 7:05 am
Author: Andrew_s
tlc wrote:I'll need to have a rummage and make sure I'm covered for 2 kits.
I'll get back to you.
Thanks, fingers crossed -
Re: Z900 - 27mm Axle Wrench
Posted: Tue Aug 08, 2017 7:43 am
Author: Bill Newman
Andrew - If Chris does not have one, I may be able to find you one later this week. I am loathe to say for certain that I have one- the last time I made that claim, I then could not find the part
Re: Z900 - 27mm Axle Wrench
Posted: Tue Aug 08, 2017 11:15 am
Author: Andrew_s
Bill Newman wrote:Andrew - If Chris does not have one, I may be able to find you one later this week. I am loathe to say for certain that I have one- the last time I made that claim, I then could not find the part
Thanks Bill, I'll let you know if Chris has a spare.
Cheers
Andrew
Re: Z900 - 27mm Axle Wrench
Posted: Fri Sep 08, 2017 6:34 pm
Author: Andrew_s
Still looking folks:
Does anyone have a good condition Z900 27mm axle wrench for sale - must have the big K logo and 'KAWASAKI' in caps, as Chris' photo below:
Please PM me if you do, thanks.
Re: Z900 - 27mm Axle Wrench
Posted: Sat Sep 09, 2017 4:04 pm
Author: Garry.L
Re: Z900 - 27mm Axle Wrench
Posted: Sat Sep 09, 2017 5:14 pm
Author: Andrew_s
Garry, thanks but that's not for the Z900 as 'Kawasaki' should be all caps.