GPz550 or Z650 exhaust

[Coose]

Evening all,

A friend of mine has just picked up a CMRC registered GPz550 but is short of a chimberly. If I'm right (and do please correct me) but I believe that one from a Z650 should be reasonably easy to fit. Ideally he'd like a Harris but would be interested in anything period.

Please let me know if you can help?

[DavidZ1R]

If your friend has very very deep pockets bike master900.de have a nos set.

[warren3200gt]

I built a stainless piper replica for one of my 650's for under £200. Delkevic headers & collector, harley dia reducer, 60mm stainless tube, universal baffle, nsr 125 hanger.
When i get in front of pc I'll post pics. Dont know how to do it using android.

[Coose]

If your friend has very very deep pockets bike master900.de have a nos set.

Cheers, but the last thing he wants is a stock set, and I won't say how the price of those compares to what he's paid for the bike...

[warren3200gt]

Pic added below

[kev edwards]

Pic added below

Or above.

[Coose]

Pic added below

Or above.

Or somewhere!
He has "some" headers but I don't know what they are or the condition, but he would like an 'Arris or summat.

[Crofty]

I once bought an alledged 650 harris off ebay, when I cleaned it up it was stamped 550. Tried it on 650 and it rubbed on sump. Therefore a 650 exhaust might hang down a bit on a 550 as height of block and head is shorter on ther 550. Spacing between cylinders does match though.

[GIMPieZ650]

I have a very good condition stainless Motad 4-1, not the most exciting pipe in the world but the offers there, is for a z500/550 but should fit the gpz just fine

[Coose]

Cheers all, for the advice and the offer of the Motad. I'll let him know and will come back to you.