I'm hoping someone can help me out? I'm looking to buy a single Z1000 piston - must be in excellent condition. The damaged one I'm looking to replace is marked "ART" and has no other markings. It measures 69.5mm diameter at the crown and 70.0mm at the skirt. The top two rings are 1.2mm thick and the oil control ring is 2.5mm.
I think this is a standard size piston?
Has anyone got anything please?
Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wanted - 1 Piston -Standard Z1000A1/2 ART
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
- 100Club
- Posts: 118
- Joined: 25th Oct 2017
- Location: stockport
Re: Wanted - 1 Piston -Standard Z1000A1/2 ART
I have some standard z1000 a2 Pistons, do yours have kl250 on them, if they are what you need you can have them
Re: Wanted - 1 Piston -Standard Z1000A1/2 ART
Just checked I have eight of them
-
- 100Club
- Posts: 118
- Joined: 25th Oct 2017
- Location: stockport
Re: Wanted - 1 Piston -Standard Z1000A1/2 ART
Hi thanks for your reply. I've just checked them carefully and the only markings are the letters "ART" and the arrow on the crown, there's no other lettering.
Is there any chance you could measure them up; do they have the ART mark on them?
Cheers Rob
Is there any chance you could measure them up; do they have the ART mark on them?
Cheers Rob
-
- 100Club
- Posts: 118
- Joined: 25th Oct 2017
- Location: stockport
Re: Wanted - 1 Piston -Standard Z1000A1/2 ART
I've been lucky enough to find an identical NOS piston this morning at very reasonable cost so all sorted now cheers.
Rob
Rob
Who is online
Users browsing this forum: No registered users and 44 guests