Page 1 of 1
Wanted - 1 Piston -Standard Z1000A1/2 ART
Posted: Sun Nov 26, 2017 9:59 pm
Author: Blackseven
I'm hoping someone can help me out? I'm looking to buy a single Z1000 piston - must be in excellent condition. The damaged one I'm looking to replace is marked "ART" and has no other markings. It measures 69.5mm diameter at the crown and 70.0mm at the skirt. The top two rings are 1.2mm thick and the oil control ring is 2.5mm.
I think this is a standard size piston?
Has anyone got anything please?
Rob
Re: Wanted - 1 Piston -Standard Z1000A1/2 ART
Posted: Sun Nov 26, 2017 10:16 pm
Author: slappa13
I have some standard z1000 a2 Pistons, do yours have kl250 on them, if they are what you need you can have them
Re: Wanted - 1 Piston -Standard Z1000A1/2 ART
Posted: Sun Nov 26, 2017 10:18 pm
Author: slappa13
Just checked I have eight of them
Re: Wanted - 1 Piston -Standard Z1000A1/2 ART
Posted: Sun Nov 26, 2017 11:00 pm
Author: Blackseven
Hi thanks for your reply. I've just checked them carefully and the only markings are the letters "ART" and the arrow on the crown, there's no other lettering.
Is there any chance you could measure them up; do they have the ART mark on them?
Cheers Rob
Re: Wanted - 1 Piston -Standard Z1000A1/2 ART
Posted: Mon Nov 27, 2017 12:26 pm
Author: Blackseven
I've been lucky enough to find an identical NOS piston this morning at very reasonable cost so all sorted now cheers.
Rob