Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Swinging arm spacer

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
chrisw1
100Club
100Club
Posts: 394
Joined: 13th Mar 2017
Location: Oswaldtwistle

Swinging arm spacer

#1 PostAuthor: chrisw1 » Thu Dec 21, 2017 7:18 pm

Good evening

I am looking for a spacer that goes between the bushes on the swinging arm on a Z1B

Part number 33036-005

Regards

Chris

User avatar
z1bman
Hardcore
Hardcore
Posts: 4671
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

Re: Swinging arm spacer

#2 PostAuthor: z1bman » Thu Dec 21, 2017 9:50 pm


chrisw1
100Club
100Club
Posts: 394
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Swinging arm spacer

#3 PostAuthor: chrisw1 » Fri Dec 22, 2017 7:21 pm

Thanks but they don't have any stock I was in there yesterday

User avatar
z1bman
Hardcore
Hardcore
Posts: 4671
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

Re: Swinging arm spacer

#4 PostAuthor: z1bman » Sat Dec 23, 2017 5:27 pm


User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2541
Joined: 1st Mar 2007
Location: Marbury, Shropshire

Re: Swinging arm spacer

#5 PostAuthor: Big Fluff » Mon Dec 25, 2017 11:02 am

If anyone can supply dimensions I more than likely have one.
Even if I haven't got one I can soon spin one up on my lathe.
Will
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2

chrisw1
100Club
100Club
Posts: 394
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Swinging arm spacer

#6 PostAuthor: chrisw1 » Mon Dec 25, 2017 2:31 pm

Big Fluff wrote:If anyone can supply dimensions I more than likely have one.
Even if I haven't got one I can soon spin one up on my lathe.
Will


Hi Will

They should be 22mm o/d ..... clearance on 17mm for the bore and 141.5mm long according to the ZPower parts book .... they are interested in stocking them if you make a few

User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2541
Joined: 1st Mar 2007
Location: Marbury, Shropshire

Re: Swinging arm spacer

#7 PostAuthor: Big Fluff » Mon Dec 25, 2017 3:54 pm

I take it they are steel, not ally?
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2

chrisw1
100Club
100Club
Posts: 394
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Swinging arm spacer

#8 PostAuthor: chrisw1 » Mon Dec 25, 2017 6:16 pm

Big Fluff wrote:I take it they are steel, not ally?


Yes they are but looking at the assembly the bushes are top hat shape so I assume the spacer is just to stop the steel inner bushes " floating " down the swing arm spindle and I can see no reason why they it couldn't be machineable nylon unless anyone can correct me on that

User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2541
Joined: 1st Mar 2007
Location: Marbury, Shropshire

Re: Swinging arm spacer

#9 PostAuthor: Big Fluff » Tue Dec 26, 2017 12:43 pm

Okay, will take a look in the morning.
I could make a few up in ally no problem, but drilling steel at that diameter and at that depth would take some doing.
Will
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2

User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2541
Joined: 1st Mar 2007
Location: Marbury, Shropshire

Re: Swinging arm spacer

#10 PostAuthor: Big Fluff » Sun Dec 31, 2017 9:01 am

Sorry for not checking yet, family commitments etc.
Tuesday is a definite.
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2

chrisw1
100Club
100Club
Posts: 394
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Swinging arm spacer

#11 PostAuthor: chrisw1 » Sun Dec 31, 2017 2:42 pm

thanks Big ...... I have sourced one in the states should be here in the new year but thanks for your offer

User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2541
Joined: 1st Mar 2007
Location: Marbury, Shropshire

Re: Swinging arm spacer

#12 PostAuthor: Big Fluff » Sun Dec 31, 2017 5:51 pm

I might make a few up anyway if any members are interested :roll:
I couuld knock up say 4 of and see where we go from there.
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2

chrisw1
100Club
100Club
Posts: 394
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Swinging arm spacer

#13 PostAuthor: chrisw1 » Sun Dec 31, 2017 7:20 pm

Big Fluff wrote:I might make a few up anyway if any members are interested :roll:
I couuld knock up say 4 of and see where we go from there.


The guy who used to make them for ZPower has retired , Im sure they would like some

ZedHead
Hardcore
Hardcore
Posts: 2727
Joined: 9th May 2009
Location: Darlington
Contact:

Re: Swinging arm spacer

#14 PostAuthor: ZedHead » Wed Feb 07, 2018 12:16 pm

This guy has 1 metre lengths of 22 od x 2.5mm wall mild steel tubing, fairly easy to cut to 141.5mm lengths i would of thought?

https://www.ebay.co.uk/itm/MILD-STEEL-E ... 2397405225

User avatar
8 Valve Mark
Custard Cream
Custard Cream
Posts: 966
Joined: 3rd Nov 2016
Location: Glasgow, tropical west Scotland

Re: Swinging arm spacer

#15 PostAuthor: 8 Valve Mark » Fri Feb 09, 2018 12:31 am

I've got about 40 metres of 22mm o/d x 2mm gauge seamless stainless tube from a microlight project.im sure i could cut,pack and post to members for £15-£20 ish.depending on whether there is much demand,mild steel, ally or nylon tube will crush with minimal lateral pressure so stainless seems safest option, any enquiries welcome. cheers mark
Last edited by 8 Valve Mark on Fri Mar 16, 2018 10:39 pm, edited 1 time in total.


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 86 guests