Z1OwnersClub GB

As above, does any one have a Dyna s thst would fit my Z1100r1

You'll need a Z1000J engine casing, oil seal and mechanical advancer as well for an 1100R engine
For new Dyna S speak to Chris at Grumpy 1260, he's usaully cheapest in the UK.

I think if you use the Ignatech you don't need to change the engine casing or need the mechanical advancer

Thanks Julian.
I have the J casing, But not the mechanical advancer.

I will email Ignitech & see what they have - thanks

My other option is the Dyna 2000, but bloody expensive .& I have no real need to be programmable.

Think i have the mechanical advancer, i had an early one and a J type, do you want me to take a look see?
AL

Mechanical advancers are still available part no 21148-1020

Al,
If it’s not too much trouble, can you see if you have one .

Thanks

I Have it Stu,its 9/10 condition, comes with centre fixing bolt and driver nut and has a Dyna 'S' rotor on it not the original.
21148-1020 to fit J 1,2 and 3 and Gpz 1100 B 1 and 2.
Pm Sent.
AL

Cheers Al
Pm replied to
Stu