Page 1 of 1
Mikuni VM22/210 pilot jets X4, around size 25
Posted: Thu Feb 15, 2018 8:13 pm
Author: Coose
As above, I'm looking for a set of 4 if anyone has them?
- pro_09_mik_sta_pil_jet_5pk-2.jpg (11.88 KiB) Viewed 3462 times
Cheers in advance,
Coose
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 7:36 am
Author: 8 Valve Mark
Hi coose, have you tried nrp-carbs.co.uk/shop 0161 832 8646
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 8:00 am
Author: warren3200gt
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 8:20 am
Author: Coose
Thank you both for your replies. As they tend to be something that doesn't really wear out I was wondering if anyone had a set kicking about before I buy new ones.
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 9:00 am
Author: warren3200gt
vm22's used on 650's and 25's would be pretty big, hence scarce, for a 650. you could ask here
http://z650.proboards.com
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 9:23 am
Author: Coose
VM22/210 is the type of jet - they're to go in my VM29 Smoothbores on my Z1000J. 25 is the size Mikuni recommend for a thou and a good starting point, where my current 15s are definitely too small as I have to wind the air screws right in.
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 1:21 pm
Author: kev edwards
PM'd
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 7:30 pm
Author: warren3200gt
Didnt read that as intended did I!
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 7:46 pm
Author: Coose
warren3200gt wrote:Didnt read that as intended did I!
Ha ha, that's ok.
I think I'm sorted now!
Re: Mikuni VM22/210 pilot jets X4, around size 25
Posted: Sun Feb 18, 2018 7:52 pm
Author: 8 Valve Mark
let us know how it goes coose.