Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

side stand bracket

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
deka
Custard Cream
Custard Cream
Posts: 764
Joined: 20th Feb 2018
Location: Newcastle upon tyne

side stand bracket

#1 PostAuthor: deka » Wed Mar 21, 2018 1:42 pm

Bit of a longshot be here goes in the hope that someobne may have a wrecked frame out there, i am after a sidestand bracket this is the part that is welded to the frame (hence the frame would be duff) i am also need the seat brackets (again the ones on the frame)...... a longshot but shy bains get no sweets
GPZ1100 A1 zrx1100 gsa1200

ZedHead
Hardcore
Hardcore
Posts: 2727
Joined: 9th May 2009
Location: Darlington
Contact:

Re: side stand bracket

#2 PostAuthor: ZedHead » Wed Mar 21, 2018 2:25 pm

I am not sure the suverners wll understand "bain" :D

Try John Browse at Wrexham.

I can get a Doremi side stand bracket for you if you are desperate but they are not cheap. PM me if you get stuck.

deka
Custard Cream
Custard Cream
Posts: 764
Joined: 20th Feb 2018
Location: Newcastle upon tyne

Re: side stand bracket

#3 PostAuthor: deka » Wed Mar 21, 2018 2:38 pm

Thanks I ill give him a go
GPZ1100 A1 zrx1100 gsa1200

User avatar
Ratty
Posts: 109
Joined: 29th Oct 2017
Location: Southend-on-Sea Essex

Re: side stand bracket

#4 PostAuthor: Ratty » Wed Mar 21, 2018 7:20 pm

The think I have a bracket in a box of old tat in the shed, give me a chance to go look and if I can find it, I will send you a photo to see if it's what you need.

deka
Custard Cream
Custard Cream
Posts: 764
Joined: 20th Feb 2018
Location: Newcastle upon tyne

Re: side stand bracket

#5 PostAuthor: deka » Wed Mar 21, 2018 7:41 pm

Brilliant. Thaks
Ratty wrote:The think I have a bracket in a box of old tat in the shed, give me a chance to go look and if I can find it, I will send you a photo to see if it's what you need.


Thanks that brilliant
GPZ1100 A1 zrx1100 gsa1200

User avatar
hartyb
100Club
100Club
Posts: 324
Joined: 22nd Oct 2017
Location: Berkshire

Re: side stand bracket

#6 PostAuthor: hartyb » Wed Mar 21, 2018 8:44 pm

would these Brackets help ?

they were welded on to a Z1R frame so it could have a Z1000 body work and seat fitted, its being turned back to Z1R body work so they will have to come off

the only down side is the Bike is out at my place in Germany right now so its going to be a little while before I will be out there to pick it up

let me know if your think they will be of help

sorry for the poor pic

IMAG0193.jpg
Z900A4, Z1000A1, Z1000ST E1,E2, Z1000Mk2 A3,Z1000H Z1R D1, z1000j3, Z1000P. Z900RS SE,
Z1300 A1,
GPZ1100 Unitrack, GPZ750E, GPZ 750Turbo, GPZ900r A1, A2, A6
ZZR1100 Purple and orange
KE175b, KE175F
along with some lesser makes :eek

deka
Custard Cream
Custard Cream
Posts: 764
Joined: 20th Feb 2018
Location: Newcastle upon tyne

Re: side stand bracket

#7 PostAuthor: deka » Thu Mar 22, 2018 10:02 am

brilliant thank you Hartyb have sent pm.

If you have any of the other bits Ratty would much appreciate
GPZ1100 A1 zrx1100 gsa1200

User avatar
Ratty
Posts: 109
Joined: 29th Oct 2017
Location: Southend-on-Sea Essex

Re: side stand bracket

#8 PostAuthor: Ratty » Thu Mar 22, 2018 6:29 pm

Will this help?

IMG_2429.JPG


IMG_2428.JPG


IMG_2427.JPG


IMG_2426.JPG

deka
Custard Cream
Custard Cream
Posts: 764
Joined: 20th Feb 2018
Location: Newcastle upon tyne

Re: side stand bracket

#9 PostAuthor: deka » Thu Mar 22, 2018 6:55 pm

Yes that’s exactly what I am looking for I will drop you a pm. What a fantastic site and a fantastic bunch of guys
GPZ1100 A1 zrx1100 gsa1200

User avatar
Ratty
Posts: 109
Joined: 29th Oct 2017
Location: Southend-on-Sea Essex

Re: side stand bracket

#10 PostAuthor: Ratty » Thu Mar 22, 2018 7:50 pm

Hi deka,

If it's any use to you it's yours if you are a PUM :D so if you haven't already here's a good excuse to join.

Send me your address and I will get it in the post to you.

Regards,

Nigel

Mick J
Regular Poster
Posts: 80
Joined: 8th Jun 2014
Location: Keith, Moray

Re: side stand bracket

#11 PostAuthor: Mick J » Thu Mar 22, 2018 8:30 pm

I have the seat rail section of frame in my shed with seat brackets attached if it's any help. It might be easier for you to have the brackets still attached so you can measure or jig it up before you cut them off? Let me know if you want it. I can take photos at the weekend if needed. Mick
Attachments
20180323_163926.jpg
Last edited by Mick J on Fri Mar 23, 2018 4:57 pm, edited 1 time in total.

User avatar
hartyb
100Club
100Club
Posts: 324
Joined: 22nd Oct 2017
Location: Berkshire

Re: side stand bracket

#12 PostAuthor: hartyb » Thu Mar 22, 2018 9:52 pm

while we have the attention of the parts of Frames stockists

has any one got the back part the bit the rear light mounts to of a Z1R or ST or Mk2 frame may even be the same on a LTD and J but not sure

this is the part I would like to find

IMAG0373.jpg
Z900A4, Z1000A1, Z1000ST E1,E2, Z1000Mk2 A3,Z1000H Z1R D1, z1000j3, Z1000P. Z900RS SE,
Z1300 A1,
GPZ1100 Unitrack, GPZ750E, GPZ 750Turbo, GPZ900r A1, A2, A6
ZZR1100 Purple and orange
KE175b, KE175F
along with some lesser makes :eek

User avatar
Ratty
Posts: 109
Joined: 29th Oct 2017
Location: Southend-on-Sea Essex

Re: side stand bracket

#13 PostAuthor: Ratty » Fri Mar 23, 2018 3:22 pm

Parcelled up and posted first class, let me know when it arrives.

Hope it helps out.

Nigel

deka
Custard Cream
Custard Cream
Posts: 764
Joined: 20th Feb 2018
Location: Newcastle upon tyne

Re: side stand bracket

#14 PostAuthor: deka » Fri Mar 23, 2018 7:12 pm

Ratty wrote:Parcelled up and posted first class, let me know when it arrives.

Hope it helps out.

Nigel


Thank you Nigel
GPZ1100 A1 zrx1100 gsa1200

deka
Custard Cream
Custard Cream
Posts: 764
Joined: 20th Feb 2018
Location: Newcastle upon tyne

Re: side stand bracket

#15 PostAuthor: deka » Fri Mar 23, 2018 7:13 pm

deka wrote:
Ratty wrote:Parcelled up and posted first class, let me know when it arrives.

Hope it helps out.

Nigel


Thank you Nigel

Will do
GPZ1100 A1 zrx1100 gsa1200


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 68 guests