Z1OwnersClub GB

GPZ1100 Unitrack cams wanted.
Usually have R7/R8 stamped on them.
Have Z9/1000 stuff to trade/px if required.

I haven't got a set but mine have got R2 on one cam and R3 on the other, the exhaust and inlet cams are identical by the way.

Yes! Julian, Thanks.
I know both are the same.
I already have one set for my turbo and they have R7/R8 and I want another set for the Supercharged.
I seem to remember that they can have any "R" number on them and the letter "A" cast next to the blank where the tacho worm would be (which is on both cams).
I looked into this quite a few years ago and it's all coming back to me now your comment has jogged my memory..
Also the German spec bikes had milder cams due to bhp limits.
As long as they have about 9.8mm lift they will do the job..

I think it was you who told me they were both the same
Which I confimed by measuring mine, I can't remember an A but it's probably there