Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z650 barrels and/or head
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z650 barrels and/or head
Building a standard Z650 engine. I have the bottom end parts, but need a good set of barrels and pistons. Also a good cylinder head. It is single row cam chain, I could use a early 750 head as long as its drilled for the top roller and has a cable tacho output.
- AL MARSHALL
- 100Club
- Posts: 241
- Joined: 13th Feb 2007
- Location: BURTON ON TRENT/ TAMWORTH
Re: Z650 barrels and/or head
hi got loads of z650 engine bits/ also a z750 barrels pistons single row camchain tacho drive in cylinder head cams /
Last edited by johnfinn on Fri Aug 03, 2018 11:09 pm, edited 1 time in total.
Thanks,
John
John
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Z650 barrels and/or head
hi, i just noticed the post. I've got a nice z650 cam cover, coils, reg/rectifier i could live without..cheers mark
Re: Z650 barrels and/or head
Sorry for a slow response been overseas for a while. I managed to source most of the bits I need off a local, but will keep i mind what you guys have.
Who is online
Users browsing this forum: Bing [Bot] and 22 guests