Page 1 of 1
Z650 barrels and/or head
Posted: Sat Apr 28, 2018 8:44 pm
Author: Crofty
Building a standard Z650 engine. I have the bottom end parts, but need a good set of barrels and pistons. Also a good cylinder head. It is single row cam chain, I could use a early 750 head as long as its drilled for the top roller and has a cable tacho output.
Re: Z650 barrels and/or head
Posted: Mon Apr 30, 2018 2:58 pm
Author: AL MARSHALL
pm sent
Re: Z650 barrels and/or head
Posted: Fri Aug 03, 2018 7:35 pm
Author: johnfinn
hi got loads of z650 engine bits/ also a z750 barrels pistons single row camchain tacho drive in cylinder head cams /
Re: Z650 barrels and/or head
Posted: Fri Aug 03, 2018 10:11 pm
Author: 8 Valve Mark
hi, i just noticed the post. I've got a nice z650 cam cover, coils, reg/rectifier i could live without..cheers mark
Re: Z650 barrels and/or head
Posted: Thu Aug 30, 2018 2:16 pm
Author: Crofty
Sorry for a slow response been overseas for a while. I managed to source most of the bits I need off a local, but will keep i mind what you guys have.