Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Points

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:

Points

#1 PostAuthor: needaz1100r » Wed May 23, 2018 6:52 pm

I have been/am chasing a low speed fault round a Z1000 and would like to eliminate the ignition system.

So..I would like to purchase, if anyone has one spare, a complete points set-up, ie backing plate, points, condensers, advance unit and points cam.

I know the advance unit is used on most electronic conversion set-ups, so may be the trickiest bit, so I would be interested in everything else including the cam, which I can fit on my advance unit.

Thank you.
Cheers,

Mark.

User avatar
Ultim8pc
Hardcore
Hardcore
Posts: 2130
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: Points

#2 PostAuthor: Ultim8pc » Wed May 23, 2018 7:09 pm

think I might have a complete point and backing plate set, but no advancer though.
Let me go have a look.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.

User avatar
Al
Hardcore
Hardcore
Posts: 2801
Joined: 21st Oct 2007
Location: Farnbronx, Sin City, N.E. Hants

Re: Points

#3 PostAuthor: Al » Wed May 23, 2018 9:23 pm

I have most of a Z1000 (early type) advancer.
It is missing; the cam (did have a Dyna 'S' on it) now long gone, and unfortunately it is also missing the two tiny damper pads from the bob weights.
Mechanically it's otherwise sound with good springs,... its marked 005.
Yours if you want it its no use to me.

Have you still got the tiny thin shim behind the cam on top of the base plate?
If so you could try taking it off, ive known them to crack and jam the cam!

AL
1981 J1

User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2541
Joined: 1st Mar 2007
Location: Marbury, Shropshire

Re: Points

#4 PostAuthor: Big Fluff » Thu May 24, 2018 12:31 pm

I may have a couple of complete sets, including backplate, TEC points, condensers, and advancers.
Will take a look tomorrow afternoon (Friday).
PM me if you don't see a reply.
Will
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2

needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:

Re: Points

#5 PostAuthor: needaz1100r » Fri May 25, 2018 1:03 pm

Al wrote:I have most of a Z1000 (early type) advancer.
It is missing; the cam (did have a Dyna 'S' on it) now long gone, and unfortunately it is also missing the two tiny damper pads from the bob weights.
Mechanically it's otherwise sound with good springs,... its marked 005.
Yours if you want it its no use to me.

Have you still got the tiny thin shim behind the cam on top of the base plate?
If so you could try taking it off, ive known them to crack and jam the cam!

AL


Thanks Al, but that's the bit I do have with the Dyna pick-up fitted.
Cheers,



Mark.

needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:

Re: Points

#6 PostAuthor: needaz1100r » Fri May 25, 2018 1:04 pm

Big Fluff wrote:I may have a couple of complete sets, including backplate, TEC points, condensers, and advancers.
Will take a look tomorrow afternoon (Friday).
PM me if you don't see a reply.
Will


Thanks Will.
Cheers,



Mark.


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 57 guests