Looking For the following if anyone can help....
Decent set of Z1/Z000/Z1R engine case covers, ie Clutch, Gennie, Points and front sprocket covers. Or if it helps swap for the full set of powdercoated Black Finned covers in the pic below.
Decent set of front forks, lowers & stanchions.(presume Z1000 A2, Later Z650 etc is the same?.)
A set of Standard or Standard look rear Shocks. Or swap for the piggy-back set in the pic below.
Lastly (for now) and a bit of a long shot, but also looking to reinstate the original front brake set-up on a Z1-R, ie lever perch, cable, master cylinder etc. everything or anything if you can help.
Ta.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1-R stuff Wanted or Swap.
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z1-R stuff Wanted or Swap.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
- paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Re: Z1-R stuff Wanted or Swap.
I have points sprocket and clutch cover
I also have some of the front brake bits like lever and mechanism down to splitter I also have a master cylinder but no cap
I also have some of the front brake bits like lever and mechanism down to splitter I also have a master cylinder but no cap
way too many Zeds
- paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Re: Z1-R stuff Wanted or Swap.
I have clutch cover sprocket cover lower sanctions cam cover if You want it
front brake lever cable system master cylinder no cap
front brake lever cable system master cylinder no cap
way too many Zeds
-
- 100Club
- Posts: 159
- Joined: 1st Sep 2008
- Location: Nottingham
Re: Z1-R stuff Wanted or Swap.
Hi Garry
Do you still need Z1R Front brake parts ?
I have just found some parts while searching in boxes for some other stuff.
I have the master cylinder body (no piston) with the master cylinder end lever and pivot pin and the reservoir with cap with hose and clips.
They are in scabby condition but you can have them if they are of any use to you.
Let me know if you want them.
Do you still need Z1R Front brake parts ?
I have just found some parts while searching in boxes for some other stuff.
I have the master cylinder body (no piston) with the master cylinder end lever and pivot pin and the reservoir with cap with hose and clips.
They are in scabby condition but you can have them if they are of any use to you.
Let me know if you want them.
Who is online
Users browsing this forum: No registered users and 50 guests