Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000J Camchain Idler
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Z1000J Camchain Idler
Has anyone got a spare Camchain idler adaptor that they would be willing to sell? Cheers, Mick
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Z1000J Camchain Idler
what's it for mick? what's being adapted? cheers mark
Re: Z1000J Camchain Idler
Mark,I am using a Z1000J head on an ST engine converted to chain with an Opcon Autorotor supercharger, I have a set of 1045 Wiseco pistons and want to reduce compression. It's an APE adaptor or similar to run an idler that I'm after. It is a long term project, but I'm always on the lookout for useful parts, cheers, Mick
Re: Z1000J Camchain Idler
http://kzzone.com/sprockets.html
Still available as far as i can see.
Rob ZED1015 did have the drill jig for this which you would need also, as i remember him doing one a few years ago.
AL
1981 J1
Re: Z1000J Camchain Idler
Thanks Al, I just had a look at the website. It's very useful to know that Rob has the drill jig, especially as he's not that far from me. Cheers, Mick
Re: Z1000J Camchain Idler
I have a jig and will drill your head FOC if you bring it.
Re: Z1000J Camchain Idler
Rob, that's very generous of you. It won't be for a while, but I'll gladly take up your offer. Keen to see your supercharged Zed. Cheers, Mick
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Z1000J Camchain Idler
sounds like a crackin' project mick. keep us posted with the progress eh? good luck! mark
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Z1000J Camchain Idler
zed1015 wrote:I have a jig and will drill your head FOC if you bring it.
good man rob!! could you drill my old ladies' head too? (4" should be enough) i WILL pay though:she's getting a bit nippy .. cheers mark
Who is online
Users browsing this forum: No registered users and 145 guests