Z1000J Camchain Idler
Posted: Thu Sep 13, 2018 7:23 pm
Has anyone got a spare Camchain idler adaptor that they would be willing to sell? Cheers, Mick
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://z1ownersclub.co.uk/phpBB3/
Z1000J Camchain Idler
Page 1 of 1
Re: Z1000J Camchain Idler
Posted: Sun Sep 16, 2018 12:16 am
what's it for mick? what's being adapted? cheers mark
Re: Z1000J Camchain Idler
Posted: Sun Sep 16, 2018 9:20 am
Mark,I am using a Z1000J head on an ST engine converted to chain with an Opcon Autorotor supercharger, I have a set of 1045 Wiseco pistons and want to reduce compression. It's an APE adaptor or similar to run an idler that I'm after. It is a long term project, but I'm always on the lookout for useful parts, cheers, Mick
Re: Z1000J Camchain Idler
Posted: Sun Sep 16, 2018 10:21 am
- ccia.jpg (30.03 KiB) Viewed 3324 times
http://kzzone.com/sprockets.html
Still available as far as i can see.
Rob ZED1015 did have the drill jig for this which you would need also, as i remember him doing one a few years ago.
AL
Re: Z1000J Camchain Idler
Posted: Sun Sep 16, 2018 5:28 pm
Thanks Al, I just had a look at the website. It's very useful to know that Rob has the drill jig, especially as he's not that far from me. Cheers, Mick
Re: Z1000J Camchain Idler
Posted: Sun Sep 16, 2018 5:38 pm
I have a jig and will drill your head FOC if you bring it.
Re: Z1000J Camchain Idler
Posted: Mon Sep 17, 2018 7:55 pm
Rob, that's very generous of you. It won't be for a while, but I'll gladly take up your offer. Keen to see your supercharged Zed. Cheers, Mick
Re: Z1000J Camchain Idler
Posted: Thu Sep 20, 2018 9:08 pm
sounds like a crackin' project mick. keep us posted with the progress eh? good luck! mark
Re: Z1000J Camchain Idler
Posted: Thu Sep 20, 2018 9:38 pm
zed1015 wrote:I have a jig and will drill your head FOC if you bring it.
good man rob!! could you drill my old ladies' head too? (4" should be enough) i WILL pay though:she's getting a bit nippy .. cheers mark