Front disc Z900/z1000 all sorted thanks.
Posted: Thu Sep 13, 2018 8:26 pm
Anyone got one for sale,
Thanks
Peter
Sorted thanks.
Thanks
Peter
Sorted thanks.
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://z1ownersclub.co.uk/phpBB3/
Front disc Z900/z1000 all sorted thanks.
Page 1 of 2
Re: Front disc Z900/z1000
Posted: Thu Sep 13, 2018 9:52 pm
I have one
Re: Front disc Z900/z1000
Posted: Fri Sep 14, 2018 3:52 pm
Cheers Paul, I have someone a bit closer to me who is looking to see if they have one but I might be back to you about yours, thanks again.
Re: Front disc Z900/z1000
Posted: Sun Sep 16, 2018 8:28 pm
paul doran wrote:I have one
You have a PM
Re: Front disc Z900/z1000
Posted: Tue Sep 18, 2018 9:22 am
Still looking
Re: Front disc Z900/z1000
Posted: Tue Sep 18, 2018 1:53 pm
Thick or thin ???
Re: Front disc Z900/z1000
Posted: Tue Sep 18, 2018 4:53 pm
Not bothered, it's going on a race bike so any will do, don't want a drilled one though.
Re: Front disc Z900/z1000
Posted: Tue Sep 18, 2018 5:13 pm
Theres a few on ebay if you want 4 hole 296mm dia
https://www.ebay.co.uk/itm/Kawasaki-Z65 ... Sw3D5bWekP
https://www.ebay.co.uk/itm/Kawasaki-Z65 ... SwaMJbTM~1
https://www.ebay.co.uk/itm/Kawasaki-Z65 ... Sw3D5bWekP
https://www.ebay.co.uk/itm/Kawasaki-Z65 ... SwaMJbTM~1
Re: Front disc Z900/z1000
Posted: Tue Sep 18, 2018 5:40 pm
Thanks for that Warren, was hoping someone on here might have a tatty rusty one they want rid off a bit cheaper 
It's going on a race bike and we're using a z900 hub.
It's going on a race bike and we're using a z900 hub.
Re: Front disc Z900/z1000
Posted: Tue Sep 18, 2018 7:38 pm
I have got a few discs I will have a look tomorrow and let you know sometime tomorrow if that’s ok.
Re: Front disc Z900/z1000
Posted: Tue Sep 18, 2018 7:51 pm
walshyco wrote:I have got a few discs I will have a look tomorrow and let you know sometime tomorrow if that’s ok.
Thanks for that, much appreciated.
Re: Front disc Z900/z1000
Posted: Wed Sep 19, 2018 1:50 pm
Hi Peter, I knew I had a couple but couldn’t remember if they were drilled or not. As you can see they are if they are any use to you, then you can have them for the cost of the postage, just one if you only want one. Sean.
Re: Front disc Z900/z1000
Posted: Wed Sep 19, 2018 8:06 pm
I may have one left but it will be Saturday before I can check
Re: Front disc Z900/z1000
Posted: Wed Sep 19, 2018 8:09 pm
Thanks for that Sean, I really want an undrilled one,
Hi Paul, if you could have a look on Saturday and let me know please,
Thanks again guys.
Hi Paul, if you could have a look on Saturday and let me know please,
Thanks again guys.
Re: Front disc Z900/z1000
Posted: Wed Sep 19, 2018 8:40 pm
I have 2, would want both to go £60 plus postage