Page 1 of 1
Z1000 MK2 Inner Sprocket cover
Posted: Wed Oct 24, 2018 5:55 am
Author: rpeters
Need a MK2 inner sprocket cover if anyone has one hiding in th egarage.
Not sure if other Z1000 will fit also?
Cheers
Rob
Re: Z1000 MK2 Inner Sprocket cover
Posted: Tue Nov 13, 2018 6:49 am
Author: rpeters
Still looking chaps, no luck so far!
Re: Z1000 MK2 Inner Sprocket cover
Posted: Wed Nov 14, 2018 4:26 am
Author: Philippe
Hi Rob
I looked it up in the parts manual, they have the same parts number(14025-1106) so you might expect that a Z1000A1/A2 inner sprocket cover will fit on a Z1000A3 or A4 engine. Take a look for yourself at CMS.nl .
Good luck with the search.
GrtZ
Philippe
Re: Z1000 MK2 Inner Sprocket cover
Posted: Wed Nov 14, 2018 8:35 pm
Author: gpjes
Two wheel Spares (D&K) I've looked at converting my shaftie motor to chain & mines an E2
Re: Z1000 MK2 Inner Sprocket cover
Posted: Wed Nov 14, 2018 8:39 pm
Author: 000zeds
Try John Browse MC Spares 01978 355556
Re: Z1000 MK2 Inner Sprocket cover
Posted: Wed Nov 14, 2018 8:58 pm
Author: engz1b
try z power, they list them for 900-1000
Re: Z1000 MK2 Inner Sprocket cover
Posted: Thu Nov 15, 2018 7:25 pm
Author: Mick J
Hi Guys, the later ones are definitely different, so early ones won't fit. I was reliably informed by knowledgeable club members when looking at converting an ST to chain drive and I have compared the inner sprocket cover from an early engine to the bevel box off the ST and some of the holes line up, but not all, I was advised to use earlier crankcases as the inner cover you are looking for are much rarer. I have had some very good parts from the USA via ebay, you just have to factor in shipping and duty, but often cheaper than Uk prices, cheers, Mick
Re: Z1000 MK2 Inner Sprocket cover
Posted: Mon Nov 19, 2018 1:53 pm
Author: rpeters
John Browse to the rescue