So I whipped off the carbs to fit my newly acquired airbox and noticed that one of the slides wasn't moving smoothly. Popped the top cover off and discovered that the little peg on the side of the lever that connects it to the slide connector has come adrift from the lever and the slide connector was moving sideways far more than it should be.
Don't suppose anyone has a spare lever or perhaps a complete slide/connector/lever assembly?
Couldn't get a picture so have attached one from a well known book so I could point out the bit that's come loose.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Carburetor Slide Lever
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- Farmer Bob
- new poster
- Posts: 10
- Joined: 10th Sep 2017
- Location: North Wiltshire
Carburetor Slide Lever
('98->) Z1B
(->'98) Z1R, T140E, XS750, T500, GT500, KH125, Astra 1.3L
(->'98) Z1R, T140E, XS750, T500, GT500, KH125, Astra 1.3L
Re: Carburetor Slide Lever
Is this what your looking for ? - https://www.ebay.co.uk/itm/3-Kawasaki-Z ... rk:12:pf:0
- Farmer Bob
- new poster
- Posts: 10
- Joined: 10th Sep 2017
- Location: North Wiltshire
Re: Carburetor Slide Lever
Exactly this, thanks. Was hoping to find one in the uk, but this will do
('98->) Z1B
(->'98) Z1R, T140E, XS750, T500, GT500, KH125, Astra 1.3L
(->'98) Z1R, T140E, XS750, T500, GT500, KH125, Astra 1.3L
Who is online
Users browsing this forum: No registered users and 262 guests