Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Pistons / Barells

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
chrisw1
100Club
100Club
Posts: 394
Joined: 13th Mar 2017
Location: Oswaldtwistle

Pistons / Barells

#1 PostAuthor: chrisw1 » Tue Nov 27, 2018 7:27 pm

hi .. the barrels I used on my Z1b were a bit marginal when i built the bike so its time to replace them
I am using 29mm CR carbs so would like to use a big bore of some sort
Does anyone have any 1015 barrels I could fit a 1075 kit or maybe a complete kit for sale ?
Maybe 903 barrels I could bore to 998 ?
Thanks Chris

User avatar
zed1015
Hardcore
Hardcore
Posts: 3798
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

Re: Pistons / Barells

#2 PostAuthor: zed1015 » Tue Nov 27, 2018 9:06 pm

You can easily go to 1015 cc (70mm) on the 900 liners.
Even sneak them out to 1045cc (71mm) but the liners end up about as thin as taking the 1015 block to 1105.

chrisw1
100Club
100Club
Posts: 394
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Pistons / Barells

#3 PostAuthor: chrisw1 » Tue Nov 27, 2018 9:32 pm

zed1015 wrote:You can easily go to 1015 cc (70mm) on the 900 liners.
Even sneak them out to 1045cc (71mm) but the liners end up about as thin as taking the 1015 block to 1105.


The barrels i have are 903 taken out to 70mm .... IMD have a 1040 piston kit but as you say it leaves the liners a bit thin and they are standard compression .....on the plus side they are on offer at £180 a set which is very tempting

But with the 29s I do fancy upping the comp ratio a bit just for the fun of it

User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2541
Joined: 1st Mar 2007
Location: Marbury, Shropshire

Re: Pistons / Barells

#4 PostAuthor: Big Fluff » Wed Nov 28, 2018 8:19 am

John Browse has plenty of blocks in stock and is a top guy to deal with.
Tel: 01978 355556 Tell him Will Barber sent you :wink:
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2

User avatar
Ultim8pc
Hardcore
Hardcore
Posts: 2128
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: Pistons / Barells

#5 PostAuthor: Ultim8pc » Wed Nov 28, 2018 11:57 am

Chris, I've got a selection of 900 and 1000 barrels. Most over bored, I can take a look at what I have if you want?
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 107 guests