Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

16012-022 Cap Limiters

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
User avatar
GuyHughes
Regular Poster
Posts: 72
Joined: 8th May 2018
Location: Chieveley
Contact:

16012-022 Cap Limiters

#1 PostAuthor: GuyHughes » Mon Apr 29, 2019 3:47 pm

Anyone know where I can get some? I need 4 for a set of Z1000 A1 Carbs. I have a set which are lacking them.

Does anyone know if they will run without?

Thanks

Guy
Guy

User avatar
Ultim8pc
ZedHead
ZedHead
Posts: 1110
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: 16012-022 Cap Limiters

#2 PostAuthor: Ultim8pc » Mon Apr 29, 2019 3:54 pm

As you have found, not available new anymore.
You don't need these for the bike to run. They are just little extenders which allow you to easily adjust the airscrews while the carbs are on the bike. But you can still adjust them with short screw driver.
http://www.airevalleyclassics.co.uk
http://www.quick-glo.co.uk
z900a5
z1000a1 (In bits)
Z1000 MK2 (Project)
z1000ST (in bits)
z1000Ltd (Project)
ZRX1200r

DavidZ1R
ZedHead
ZedHead
Posts: 1128
Joined: 12th Jun 2011
Location: Bolton Lancs

Re: 16012-022 Cap Limiters

#3 PostAuthor: DavidZ1R » Mon Apr 29, 2019 5:15 pm

I have been after some for a while, no joy.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

User avatar
ZedHead
Hardcore
Hardcore
Posts: 2606
Joined: 9th May 2009
Location: Darlington
Contact:

Re: 16012-022 Cap Limiters

#4 PostAuthor: ZedHead » Mon Apr 29, 2019 7:13 pm

Not reproduced to the best of my knowledge.

User avatar
Ultim8pc
ZedHead
ZedHead
Posts: 1110
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: 16012-022 Cap Limiters

#5 PostAuthor: Ultim8pc » Tue Apr 30, 2019 10:09 am

ZedHead wrote:Not reproduced to the best of my knowledge.

+1 to that..
http://www.airevalleyclassics.co.uk
http://www.quick-glo.co.uk
z900a5
z1000a1 (In bits)
Z1000 MK2 (Project)
z1000ST (in bits)
z1000Ltd (Project)
ZRX1200r

User avatar
GuyHughes
Regular Poster
Posts: 72
Joined: 8th May 2018
Location: Chieveley
Contact:

Re: 16012-022 Cap Limiters

#6 PostAuthor: GuyHughes » Tue Apr 30, 2019 11:14 am

Thanks all for the info, its as I thought but wanted to check. Appreciate the feedback.
Guy

User avatar
scott
Junior Section leader
Posts: 1161
Joined: 19th Sep 2007
Location: PORTSMOUTH

Re: 16012-022 Cap Limiters

#7 PostAuthor: scott » Tue Apr 30, 2019 11:58 am

Guy, i recently bought a couple of sets of those hens teeth. They were not cheap. I'll check how many i have left. Send me a pm and we'll get some to you.

User avatar
warren3200gt
ZedHead
ZedHead
Posts: 1204
Joined: 13th Jun 2014
Location: Dartford Kent

Re: 16012-022 Cap Limiters

#8 PostAuthor: warren3200gt » Tue Apr 30, 2019 1:09 pm

Is there any truth in the alleged "go to method" of screwing the fuel needle closed and then only using the airscrew mixture screw to adjust pilots as per normal airscrew only carbs :whoa
PUM 488 June 20
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, 89 ZXR750H1

User avatar
GuyHughes
Regular Poster
Posts: 72
Joined: 8th May 2018
Location: Chieveley
Contact:

Re: 16012-022 Cap Limiters

#9 PostAuthor: GuyHughes » Wed May 01, 2019 8:10 am

Will do


scott wrote:Guy, i recently bought a couple of sets of those hens teeth. They were not cheap. I'll check how many i have left. Send me a pm and we'll get some to you.
Guy


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 3 guests