Anyone know where I can get some? I need 4 for a set of Z1000 A1 Carbs. I have a set which are lacking them.
Does anyone know if they will run without?
Thanks
Guy
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
16012-022 Cap Limiters
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: 16012-022 Cap Limiters
As you have found, not available new anymore.
You don't need these for the bike to run. They are just little extenders which allow you to easily adjust the airscrews while the carbs are on the bike. But you can still adjust them with short screw driver.
You don't need these for the bike to run. They are just little extenders which allow you to easily adjust the airscrews while the carbs are on the bike. But you can still adjust them with short screw driver.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: 16012-022 Cap Limiters
I have been after some for a while, no joy.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: 16012-022 Cap Limiters
Not reproduced to the best of my knowledge.
Re: 16012-022 Cap Limiters
ZedHead wrote:Not reproduced to the best of my knowledge.
+1 to that..
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: 16012-022 Cap Limiters
Thanks all for the info, its as I thought but wanted to check. Appreciate the feedback.
Guy
Re: 16012-022 Cap Limiters
Guy, i recently bought a couple of sets of those hens teeth. They were not cheap. I'll check how many i have left. Send me a pm and we'll get some to you.
- warren3200gt
- Hardcore
- Posts: 2686
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: 16012-022 Cap Limiters
Is there any truth in the alleged "go to method" of screwing the fuel needle closed and then only using the airscrew mixture screw to adjust pilots as per normal airscrew only carbs
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: 16012-022 Cap Limiters
Will do
scott wrote:Guy, i recently bought a couple of sets of those hens teeth. They were not cheap. I'll check how many i have left. Send me a pm and we'll get some to you.
Guy
Who is online
Users browsing this forum: No registered users and 44 guests