Page 1 of 1
16012-022 Cap Limiters
Posted: Mon Apr 29, 2019 3:47 pm
Author: GuyHughes
Anyone know where I can get some? I need 4 for a set of Z1000 A1 Carbs. I have a set which are lacking them.
Does anyone know if they will run without?
Thanks
Guy
Re: 16012-022 Cap Limiters
Posted: Mon Apr 29, 2019 3:54 pm
Author: Ultim8pc
As you have found, not available new anymore.
You don't need these for the bike to run. They are just little extenders which allow you to easily adjust the airscrews while the carbs are on the bike. But you can still adjust them with short screw driver.
Re: 16012-022 Cap Limiters
Posted: Mon Apr 29, 2019 5:15 pm
Author: DavidZ1R
I have been after some for a while, no joy.
Re: 16012-022 Cap Limiters
Posted: Mon Apr 29, 2019 7:13 pm
Author: ZedHead
Not reproduced to the best of my knowledge.
Re: 16012-022 Cap Limiters
Posted: Tue Apr 30, 2019 10:09 am
Author: Ultim8pc
ZedHead wrote:Not reproduced to the best of my knowledge.
+1 to that..
Re: 16012-022 Cap Limiters
Posted: Tue Apr 30, 2019 11:14 am
Author: GuyHughes
Thanks all for the info, its as I thought but wanted to check. Appreciate the feedback.
Re: 16012-022 Cap Limiters
Posted: Tue Apr 30, 2019 11:58 am
Author: scott
Guy, i recently bought a couple of sets of those hens teeth. They were not cheap. I'll check how many i have left. Send me a pm and we'll get some to you.
Re: 16012-022 Cap Limiters
Posted: Tue Apr 30, 2019 1:09 pm
Author: warren3200gt
Is there any truth in the alleged "go to method" of screwing the fuel needle closed and then only using the airscrew mixture screw to adjust pilots as per normal airscrew only carbs
Re: 16012-022 Cap Limiters
Posted: Wed May 01, 2019 8:10 am
Author: GuyHughes
Will do
scott wrote:Guy, i recently bought a couple of sets of those hens teeth. They were not cheap. I'll check how many i have left. Send me a pm and we'll get some to you.