As above wanted a Locating plate for J,R GPz rhs switch. If anyone has a broken or incomplete switch they don’t need all I need is the metal plate which screws inside that has the small locating spigot for the bars. The previous owner ground them off in his enthusiasm to fit Renthals meaning the switch turns unless it’s over tightened, I’m putting the standard bard back on having got them re-chromed, if anyone has one of these they don’t need it would save a bit of arsing about. At the same time if there’s a longer screw from that switch (5x40 black) in good shape I’d like one of those too...
I don’t know why people butcher switches instead of drilling a small hole in the new bars, my mate bought a ZRX they guy had done the same thing except the Rex pin is plastic they’d just broken them off...
Anyway here’s the bit I need, the metal plate held In by the two wee screws. It should have a protruding spud where the grind mark is... thanks in advance
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Locating plate J,R GPz rhs switch
Moderators: chrisu, paul doran, Taffus, KeithZ1R
- paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Re: Locating plate J,R GPz rhs switch
Paul I’ll give you a call tomorrow evening
Re: Locating plate J,R GPz rhs switch
I’ll have one as well if Paul struggles.
Asphalt Cowboy Z1100R, 1981 Z1000J
- paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Locating plate J,R GPz rhs switch
I've got a whole switch if you want it
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: Locating plate J,R GPz rhs switch
Thanks for the help sorted
Who is online
Users browsing this forum: No registered users and 58 guests