1977 Z1000A1 Switchgear

[r3sc]

Hi,

In my bike’s dim and distant past a previous owner decided to fit different handlebars which wouldn’t accept the wiring running through them so he cut a large scallop out of the OEM switchgear on both sides to allow the wiring to exit.

To rectify this problem I am looking for a pair of OEM bottom switchgear halves or complete units so that I can run the wires down the original handlebars which thankfully came with the bike.

If you can help, please send me a PM.

My switches work fine but ideally I just need a good pair of lower half bodies that haven’t been modified.

Many thanks.

[warren3200gt]

I would think 650 ones would be the same. So you could broaden your search with more chane of success. Although I would just fill the new scollops with plastic metal or jb weld or something. Gotta to be easier and shed loads cheaper than finding the new bits.

[Philippe]

Hi r3sc
as you mentioned in your post: a different handlebar was fitted...it happened a lot of times in the past so the original undamaged switchgear halves are difficult to find.
As Warren mentioned, you could try to find those of a Z650, you never know if you're lucky until you tried it.
GrtZ
Philippe

[8 Valve Mark]

i had a pair until recently, sold the lhs to someone in need. so i still have the rhs if you need one. m

[r3sc]

Yes please.

Could you please PM me with details. It is for the A1?

Many Thanks.