Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Dimensions

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:

Dimensions

#1 PostAuthor: needaz1100r » Tue Dec 10, 2019 10:10 am

Please could somebody accurately measure the Z1000A2, behind the fork caliper slider bolts?

NLA and I have a set of calipers missing them so my only option is to make some unless anyone has a set to sell.
Cheers,

Mark.

User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 4528
Joined: 21st Mar 2009
Location: Charminster. Bournemouth

Re: Dimensions

#2 PostAuthor: ADRIAN H » Tue Dec 10, 2019 11:31 am

Do you mean the slider bolts that fix the calliper mounting bracket to the calliper.
Or the actual calliper mount bolts on to the forks.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.

User avatar
flateddie
100Club
100Club
Posts: 146
Joined: 22nd May 2014
Location: Weston Super Mare

Re: Dimensions

#3 PostAuthor: flateddie » Tue Dec 10, 2019 11:46 am

the bolts for mounting the calliper or the sliders are available along with the o rings and rubber boots try z power or Cybike
Z1b, z1000a1 x 2 , Aprilia v4 Tuono factory, SV1000

needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:

Re: Dimensions

#4 PostAuthor: needaz1100r » Tue Dec 10, 2019 3:38 pm

Please guys give me a bit of credit, I know I look stupid but, the slider bolts that go through the caliper and the mounting bracket, I can work out the fork to caliper bolts.

They are not in stock and NLA at Z-Power as of 9.18 this morning.
Cheers,



Mark.

User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 4528
Joined: 21st Mar 2009
Location: Charminster. Bournemouth

Re: Dimensions

#5 PostAuthor: ADRIAN H » Tue Dec 10, 2019 9:34 pm

adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.

needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:

Re: Dimensions

#6 PostAuthor: needaz1100r » Tue Dec 10, 2019 10:51 pm



Thank you, I couldn't find any on Ebay. I'll message and see if they have any more in the morning.

Thanks again.
Cheers,



Mark.

User avatar
Gus
Hardcore
Hardcore
Posts: 1481
Joined: 17th Mar 2007
Location: Gloucestershire

Re: Dimensions

#7 PostAuthor: Gus » Wed Dec 11, 2019 9:14 am

"Set the GRINDER on it"

User avatar
Gus
Hardcore
Hardcore
Posts: 1481
Joined: 17th Mar 2007
Location: Gloucestershire

Re: Dimensions

#8 PostAuthor: Gus » Wed Dec 11, 2019 9:20 am

Borrowed from another post by KWACKERZ1

KWACKERZ1 wrote:Hi guys, Thought this price list from PHIL DENTON ENGINEERING may be a useful guide for people after stainless stuff.
I have no connection with them but have had them make me custom stuff and they have been really good.

http://www.phildentonengineering.com
Hope its useful

KAWASAKI Z900
SWING ARM SPINDLE NUT 92019-012 each 7.82
SWING ARM SPINDLE (also Later Z1B) 33032-036 each 51.49
CARB FLOAT BOWL DRAIN PLUG (NB can be brass for early models) 16049-005 each 11.89
REAR CHAIN ADJUSTER BOLT/NUT (M10) 92001-143 pair 18.68
REAR BRAKE ROD 43011-017 each 25.51
REAR BRAKE TRUNNION 92043-065 each 4.07
REAR BRAKE ADJUSTER 92015-056 each 8.05
ENGINE MOUNTING SPACER (long - 52mm) 92027-159 each 16.84
ENGINE MOUNTING SPACER (short - 31mm) 92027-160 each 9.36
REAR WHEEL SPACER 42032-037 each 14.18
FORK LEG TOP BOLT 44062-003 pair 38.99
STEERING STEM TOP BOLT & WASHER 92007-031/92022-230 each 22.09
STEERING STEM TOP BOLT WAVE WASHER 46100-003 each 0.00
STEERING HEAD BEARING ADJUSTER NUT 92090-007 each 21.77
STEERING HEAD DUST COVER 46098-010 each 25.51
FRONT WHEEL SPINDLE 41068-049 each 39.83
FRONT WHEEL SPACER 41069-032 each 8.80
FRONT WHEEL SLEEVE NUT (2 off req) 41069-033 pair 29.40
FOOTREST CUP WASHERS (4 off req) 92102-010 set 11.04
FOOTREST HANGER MOUNT ACORN NUT (set of 4) 92019-013 set 24.90
FRONT BRAKE CALIPER MOUNTING BOLT (set of 4) 92007-032 set 35.01
FRONT BRAKE CALIPER SLIDE BOLT AND NUT (set of 4) 43045-006 set 42.41
FRONT BRAKE CALIPER PISTON 43048-006 each 21.40
BRAKE CALIPER BLEED NIPPLE 43085-001 each 8.76
CHOKE PIVOT SCREW (Carb Body) 16046-005 each 5.52
CYLINDER HEAD NUT (set of 12) 92015-076 set 93.48
EXHAUST MOUNTING BOLT 92003-131 pair 35.10
REAR BRAKE TORQUE ARM BOLT - TO SWING ARM 92003-103 each 10.67
REAR BRAKE TORQUE ARM BOLT - TO BRAKE 92003-101 each 11.28
REAR SHOCKER MOUNTING BOTTOM BOLT 113N1035 each 7.58
REAR WHEEL SPINDLE 42031-034 each 65.44
REAR WHEEL NUT 42045-018 each 11.52
REAR WHEEL SPACER - BRAKE SIDE 42032-037 each 14.18
REAR WHEEL SPACER - SPROCKET SIDE 42037-023 each 7.59
REAR WHEEL WASHER - 4.5 THICK 92022-248 each 2.57
REAR WHEEL WASHER - 6.0 THICK 92022-249 each 2.57
FRONT BRAKE DISC MOUNTING BOLT (M10 X 32 ) - set of 8 92001-158 set 59.84
FRONT BRAKE BLEED NIPPLE 43085-001 each 8.76
FRONT FORK BOTTOM YOKE PINCH BOLT (M12 X 36) 92003-064 pair 17.46
FOOTREST PIVOT PIN 92043-080 pair 10.21
FOOTREST WASHER 92022-250 pair 2.99
PILLION FOOTREST PIVOT PIN 92043-079 pair 10.96
EXHAUST STUD - M6 (set of 8) 92004-049 set 34.44
EXHAUST STUD - M8 (set of 8) 92004-065 set 40.77



KAWASAKI Z1000
CYLINDER HEAD NUT (set 12) 92015-076 set 93.48
BRAKE CALIPER BLEED NIPPLE 43085-001 each 8.76
REAR BRAKE CALIPER PISTON 43048-008 pair 38.17
FRONT BRAKE CALIPER PISTON 43048-009 (A1) each 21.77
REAR BRAKE PEDAL TO M/CYL PUSH ROD BOLT 92003-198 each 8.61
F/R BRAKE CALIPER SLIDE BOLT (set 4) 43045-006 set 42.41


gUS
"Set the GRINDER on it"

needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:

Re: Dimensions

#9 PostAuthor: needaz1100r » Wed Dec 11, 2019 11:02 am

Gus wrote:Borrowed from another post by KWACKERZ1

KWACKERZ1 wrote:Hi guys, Thought this price list from PHIL DENTON ENGINEERING may be a useful guide for people after stainless stuff.
I have no connection with them but have had them make me custom stuff and they have been really good.

http://www.phildentonengineering.com
Hope its useful


F/R BRAKE CALIPER SLIDE BOLT (set 4) 43045-006 set 42.41


gUS


Thanks for this, very useful indeed.
Cheers,



Mark.

User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 4528
Joined: 21st Mar 2009
Location: Charminster. Bournemouth

Re: Dimensions

#10 PostAuthor: ADRIAN H » Wed Dec 11, 2019 7:39 pm

Gus wrote:Borrowed from another post by KWACKERZ1
F/R BRAKE CALIPER SLIDE BOLT (set 4) 43045-006 set 42.41


Nice one.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 56 guests