Page 1 of 1
Gpz1100 b1/b2/elr muscle arm
Posted: Tue Jan 07, 2020 10:24 pm
Author: DDZ900
Wanted ! alloy muscle swinging arm for 1981 Gpz1100 b1/b2
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Wed Jan 08, 2020 8:47 am
Author: Julian_Boolean
Zephyr swingarms fit, you'll need to change the rear wheel bearings and get spacers made, 750 and 1100 need a sleeve for the swingarm spindle as well, I think the 550 doesn't.
750 and 1100 are a bit longer than stock, I don't know about the 550.
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Wed Jan 08, 2020 5:18 pm
Author: zippy
I've got a Zrx1100 one that was fitted to my B2.It's sleeved down to fit B2 swingarm spindle and the spacers have been shaved to suit.Also powder coated black. PM me if interested.
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Wed Jan 08, 2020 10:22 pm
Author: Ratty
I have a brand new Metmachex.
Cost £500ish sensible offer would take it.
Only fitted to my ELR with a daft size wheel for me to decide I would keep to standard
Struggling to get a photo uploaded, let me know if you are interested and I will try again.
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Wed Jan 08, 2020 10:25 pm
Author: Ratty
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Wed Jan 08, 2020 11:30 pm
Author: 8 Valve Mark
zippy wrote:I've got a Zrx1100 one that was fitted to my B2.It's sleeved down to fit B2 swingarm spindle and the spacers have been shaved to suit.Also powder coated black. PM me if interested.
that'll be the one you agreed to sell me before Christmas then?? weird that!...
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Thu Jan 09, 2020 6:14 pm
Author: Ratty
Some measurements as requested, will fit a larger rear wheel than standard just needs spacers to suit.
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Thu Jan 09, 2020 6:16 pm
Author: Ratty
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Thu Jan 09, 2020 7:36 pm
Author: Bill P
Ive got one but can't sell it to you
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Thu Jan 09, 2020 9:33 pm
Author: MikeP
8 Valve Mark wrote:zippy wrote:I've got a Zrx1100 one that was fitted to my B2.It's sleeved down to fit B2 swingarm spindle and the spacers have been shaved to suit.Also powder coated black. PM me if interested.
that'll be the one you agreed to sell me before Christmas then?? weird that!...
And some fell on stoney ground, eh Mark.
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Tue Jan 28, 2020 1:07 pm
Author: scott
I have a used Metmachex one that came off my Gpz1100b1 if you need.
Re: Gpz1100 b1/b2/elr muscle arm
Posted: Sat Feb 15, 2020 6:36 pm
Author: DDZ900
Massif thumbs up to Scott ! top guy