Hi All,
Looking for the grommet that's on the points plate cable that goes to the coils,there's a slot in the casing where it sits this is for a Z1A but I assume there the same across the Z range.
Thank's,
Niall.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Points Plate Grommet
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Points Plate Grommet
Niall Mehigan
Re: Points Plate Grommet
Niall I might have one will look tomorrow
Have you tried Paul Doran
Have you tried Paul Doran
Zeds-R-Us
Re: Points Plate Grommet
The grommet in question appears to have an odd shape in that it has a flat side and is 'D' shaped.
Just a suggestion -
I suppose until one turns up, you could use a 'normal' round (maybe slightly undersize) one with a smear of silicon which should seal against the elements ok.
At least it would allow use of the bike without fear of water ingress knocking the ignition out.
Just a suggestion -
I suppose until one turns up, you could use a 'normal' round (maybe slightly undersize) one with a smear of silicon which should seal against the elements ok.
At least it would allow use of the bike without fear of water ingress knocking the ignition out.
010
Re: Points Plate Grommet
Kev,as you said it's D shaped hopefully one will turn up as the Z1A is a restoration project but nearly there now just the carbs and wiring harness to fit and we'll see how it goes,thank you for your suggestion.
Niall.
Niall.
Niall Mehigan
Re: Points Plate Grommet
Ive previously cut one out of rubber to shape , seem to remember the hole was a pain in the arse .
got a few points set up now i've removed for electronic ignition so will have a look for one
got a few points set up now i've removed for electronic ignition so will have a look for one
Re: Points Plate Grommet
Thank you 73z1 it's an option if a grommet dose'nt turn up.
Niall.
Niall.
Niall Mehigan
Re: Points Plate Grommet
All sorted now thanks to Bill P a gent,and Thank you to ALL who make suggestions/options.
Have a good Easter in whatever shape or form.
Niall.
Have a good Easter in whatever shape or form.
Niall.
Niall Mehigan
Who is online
Users browsing this forum: No registered users and 39 guests