Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000J Side Stand Springs - 3 Spring Setup

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
LeeJackson
100Club
100Club
Posts: 458
Joined: 17th Oct 2015
Location: Aberdeen, Scotland

Z1000J Side Stand Springs - 3 Spring Setup

#1 PostAuthor: LeeJackson » Tue Apr 07, 2020 10:45 am

Gents

Just getting the J all ready for when were allowed out again and last year I had a rather scary moment when the side stand decided to flip down on me when ridding! Assumingly because I had the wrong spring setup on it.. SO I am after the correct three Springs needed but all seem to be no longer available. Does anyone have any ideas on where to source these?

92081-1464 - SPRING,SD STAND,L=49
92081-1480 - SPRING,S STAND,L=177
92081-1463 - SPRING,SD STAND,L=109

Thanks in advance everyone!

Lee

User avatar
compo z1r
ZedHead
ZedHead
Posts: 1128
Joined: 25th Sep 2008
Location: SQUIRES NORTH YORKS
Contact:

Re: Z1000J Side Stand Springs - 3 Spring Setup

#2 PostAuthor: compo z1r » Tue Apr 07, 2020 1:54 pm

Lee not your part No’s but look at other mods German ebay is ok for springs them sizes look common :biggrin
B3B4B1E8-E333-44DA-9156-8DAE876A6F3D.png
THE ORIGINAL TARMAC TERRORIST

Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???

Z1OC # 886 till 2026

User avatar
compo z1r
ZedHead
ZedHead
Posts: 1128
Joined: 25th Sep 2008
Location: SQUIRES NORTH YORKS
Contact:

Re: Z1000J Side Stand Springs - 3 Spring Setup

#3 PostAuthor: compo z1r » Tue Apr 07, 2020 2:24 pm

Lee take it with 3 ur running cutout switch just checked yours there the same as German z1r :biggrin

2BF270C8-2C9D-4FD1-B00F-1313F81E49F1.jpeg


AD36BA6E-D376-4195-A4F9-449FBAEAE2D4.jpeg


AC4D3D9B-E5E2-497D-96FC-4DCB4F87E0D9.jpeg


F66EC2D2-E33E-4050-808B-8BCF0560454A.jpeg


89E2A98C-03A2-495C-B71D-6B6F2A6A749F.jpeg


And if u are do u need the switch spring ?
THE ORIGINAL TARMAC TERRORIST

Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???

Z1OC # 886 till 2026

User avatar
compo z1r
ZedHead
ZedHead
Posts: 1128
Joined: 25th Sep 2008
Location: SQUIRES NORTH YORKS
Contact:

Re: Z1000J Side Stand Springs - 3 Spring Setup

#4 PostAuthor: compo z1r » Tue Apr 07, 2020 2:26 pm

The 13 euro one fits ? Last time I looked there all on eBay. De
THE ORIGINAL TARMAC TERRORIST

Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???

Z1OC # 886 till 2026

User avatar
compo z1r
ZedHead
ZedHead
Posts: 1128
Joined: 25th Sep 2008
Location: SQUIRES NORTH YORKS
Contact:

Re: Z1000J Side Stand Springs - 3 Spring Setup

#5 PostAuthor: compo z1r » Tue Apr 07, 2020 2:59 pm

Lee u may have incorrect side stand and had correct springs ? Look at pic 2 the other spring is a bit distorted and longer as incorrect stand was used on the 1000s I got Germans had 2 for 18” wheel and 19” make sure ur stand is right first :biggrin

DE3E3FC3-0176-4DF2-8662-DB54889A0816.jpeg
THE ORIGINAL TARMAC TERRORIST

Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???

Z1OC # 886 till 2026

User avatar
tlc
Hardcore
Hardcore
Posts: 4135
Joined: 6th Nov 2007
Location: Aylesbury

Re: Z1000J Side Stand Springs - 3 Spring Setup

#6 PostAuthor: tlc » Tue Apr 07, 2020 7:38 pm

I have a complete set up if you need. Stand, washer and 3 springs.
Asphalt Cowboy Z1100R, 1981 Z1000J

LeeJackson
100Club
100Club
Posts: 458
Joined: 17th Oct 2015
Location: Aberdeen, Scotland

Re: Z1000J Side Stand Springs - 3 Spring Setup

#7 PostAuthor: LeeJackson » Tue Apr 07, 2020 10:47 pm

compo z1r wrote:Lee u may have incorrect side stand and had correct springs ? Look at pic 2 the other spring is a bit distorted and longer as incorrect stand was used on the 1000s I got Germans had 2 for 18” wheel and 19” make sure ur stand is right first :biggrin

DE3E3FC3-0176-4DF2-8662-DB54889A0816.jpeg


Compo thanks for the feedback, I don’t need the short spring indeed as I’ve no cut out switch. To complicate things identifying the setup needed this bike came from France although when I checked the French drawings it looks like it had a single spring stand so all a bit confusing.. bike started life as a standard J2 and was very much standard so I’m thinking the stand should be correct. The springs could have gotten confused in my own mess though and I’m damned if I can find any more to cross check. So the stand you picture there look two different lengths so I assume two different spring setups?

LeeJackson
100Club
100Club
Posts: 458
Joined: 17th Oct 2015
Location: Aberdeen, Scotland

Re: Z1000J Side Stand Springs - 3 Spring Setup

#8 PostAuthor: LeeJackson » Tue Apr 07, 2020 10:48 pm

tlc wrote:I have a complete set up if you need. Stand, washer and 3 springs.


TLC - long time hope your well? Now that may be the easier option to ensure I don’t get the wrong combo of stand and springs. Will send you a PM. Thanks!


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 63 guests