Page 1 of 1

exhaust GPZ1100B2

Posted: Fri May 15, 2020 4:27 pm
Author: Philippe
Hi men !
as a few of you could see, my GPZ 1100 B2 is nearly finished.
Nearly...I'm looking for a few parts of the exhaust system. :down
I need the two donwpipes n° 2 and n°3, the left hand heat shield and the left hand exhaust hanger.
I have an allmost complete ZX ( uni-trac) exhaust and thought the two downpipes were the same...they aren't, they extend about two cm deeper than the ones I need for the B2 exhaust so they don't fit in the collector under the engine...
Can someone help me please ????
If you have one or more parts you can send a PM with the price you would like to obtain for them. :D
GrtZ
Philippe

Re: exhaust GPZ1100B2

Posted: Sat May 16, 2020 9:03 am
Author: MikeP
Not sure if these are the same as this came off my B1:
20200516_095951.jpg

20200516_095943.jpg

I have the opposite side too but one of the clamps is missing

Re: exhaust GPZ1100B2

Posted: Sat May 16, 2020 9:20 am
Author: gpzer
hi,the b1 and b2 exhaust shields are identical except b1 shields are matt black instead of shiny black chrome...hope that helps :D

Re: exhaust GPZ1100B2

Posted: Sun May 17, 2020 6:29 am
Author: Philippe
Hi guys
an update: the left hand heat shield is found! A NOS part that comes from Germany.
missing parts: exhaust downpipes n°2 and n°3, the left hand exhausthanger.
Many thanks to MikeP and to gpzer for the information.
Mike, you have a PM!
GrtZ
Philippe

Re: exhaust GPZ1100B2

Posted: Mon Jun 01, 2020 4:46 am
Author: Philippe
Hi men
a final update:
-the two downpipes were found in Germany, they're on the way "home"
-the left hand exhaust hanger was allso found in Germany and on his way to me.
Within a short while you'll get an update in the "project division".
GrtZ
Philippe