Page 1 of 1
GPZ1100 B2 Z1000J Pickups
Posted: Fri May 22, 2020 11:35 am
Author: 1962royp
Hi Guys
Im looking for a set of Ignition Pickups for my KZ1000 K1 Ltd same as Gpz1100 B2 and Z1000J can anybody help?
Re: GPZ1100 B2 Z1000J Pickups
Posted: Fri May 22, 2020 12:48 pm
Author: rickm
I fitted a Dyna S system to my J a year or so ago, so will have some of the old parts left.
Can you tell me exactly which bits you want (a picture would be good if poss) and I'll hove a look.
Re: GPZ1100 B2 Z1000J Pickups
Posted: Fri May 22, 2020 1:21 pm
Author: Philippe
Hi Roy
have a look at this: brand new, original and in the UK!
http://www.z-power.co.uk/z1000e1e2-st/i ... -z10001100GrtZ
Philippe
Re: GPZ1100 B2 Z1000J Pickups
Posted: Fri May 22, 2020 2:47 pm
Author: 1962royp
Thanks Guys i know i can buy a new one but i have 3 projects on the go.
Rick basicly if you take the points cover off on the r/hand side of the engine there will be two pick ups on the back plate in there and a sealed wire to a 4 pin plug thats what i need if you click on Philippes link thats what i want if you have used the back plate not a problem.
Re: GPZ1100 B2 Z1000J Pickups
Posted: Fri May 22, 2020 3:37 pm
Author: rickm
This is what I have:
It worked ok when I took it off. I think my IC ignitor was the problem, so just bit the bullet and went Dyna S.
Not sure what it's worth, if you want to make me an offer?
Re: GPZ1100 B2 Z1000J Pickups
Posted: Fri May 22, 2020 4:00 pm
Author: 1962royp
Thats just what i want hows £30 inc post
Re: GPZ1100 B2 Z1000J Pickups
Posted: Fri May 22, 2020 4:21 pm
Author: rickm
Sounds fair to me.
I'll send you a PM and we can sort things out.