Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Standard carbs. Wanted

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1963
Joined: 1st Sep 2007
Location: Leicestershire

Standard carbs. Wanted

#1 PostAuthor: KWACKERZ1 » Mon May 25, 2020 8:53 pm

Anyone got a good set of standard slide carbs for sale.

kev edwards
Hardcore
Hardcore
Posts: 2051
Joined: 3rd Apr 2009
Location: leverington UK

Re: Standard carbs. Wanted

#2 PostAuthor: kev edwards » Tue May 26, 2020 8:52 pm

Standard for what? Do you want model specific, daily runner, concours?

User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1963
Joined: 1st Sep 2007
Location: Leicestershire

Re: Standard carbs. Wanted

#3 PostAuthor: KWACKERZ1 » Wed May 27, 2020 9:26 am

Sorry z900 z1000 slide carbs not bothered if they are 26/28 s .
Just a good working set for a 1075 engine bike a friend has, not a concours resto just a good running weekend ride.

kev edwards
Hardcore
Hardcore
Posts: 2051
Joined: 3rd Apr 2009
Location: leverington UK

Re: Standard carbs. Wanted

#4 PostAuthor: kev edwards » Wed May 27, 2020 10:05 am

I have a set of 26's recently taken off my thou, they are for an A2,, full working order have a video of bike running with them on, drained, will give you more info later

User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1963
Joined: 1st Sep 2007
Location: Leicestershire

Re: Standard carbs. Wanted

#5 PostAuthor: KWACKERZ1 » Wed May 27, 2020 10:55 am

Cheers Kev.

Bill P
Hardcore
Hardcore
Posts: 1292
Joined: 17th Aug 2015
Location: Derbyshire

Re: Standard carbs. Wanted

#6 PostAuthor: Bill P » Wed May 27, 2020 2:42 pm

Ive got some Ribless carbs

kev edwards
Hardcore
Hardcore
Posts: 2051
Joined: 3rd Apr 2009
Location: leverington UK

Re: Standard carbs. Wanted

#7 PostAuthor: kev edwards » Wed May 27, 2020 4:12 pm

As promised info and pics, 26mm off a Z1000 A2, so have the vacuum stub, with a bung on as mine does not have vac tap, they are the ones that came with my bike and were gummed up and had a bad repair to number one carb, what must of happened is one of the sealing balls on number one must of come out and came to me with a badly fitted grub screw and epoxy which was leaking, i removed this and cut a 5mm thread and have put a stainless countersunk screw in there sealed with ptfe tape, been fine since, they have 107.5 mains, 20 pilots, 5cn7-3 needles, pilot screws 1 and 1/4 turns out, i made brass drain screws for them, stainless allen screws on bowls and tops float levels were set wet using correct tool, then synchronized on the bench and then on the bike, i now have a set of pumpers on my bike, as these may be going on a 1075 i can change the mains for a larger size, i have 112.5, 117.5 or 122.5 if desired. they have worked fine all the time on the bike, i changed them just before lock down, i have drained them, removed the bowls and hung them up for a couple of weeks so they did not varnish up, these will be plug and play with either minor jetting changes and vac balancing. £250. posted

https://www.youtube.com/watch?v=CTeHycLbW8k


here is a you-tube video done this spring with these carbs, and a few pics.
20200527_162526.jpg
20200527_162410.jpg
20200527_162502.jpg
20200527_162418.jpg


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 52 guests