Find myself in need of an inner ignition housing and cover for the J.
J, Gpz 1100B, z1000R inner housing needed because it has Dyna 2000 therefore Z1100R1 and Unitrak 1100A wont work for me.
The outer cover could be any of the above as although slightly different outwardly on the later models, they are physically the same.
Cash, Card, Cheque, maybe even paypal if i can figure it out
Not in a hurry.
AL
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
J ignition housing and cover plate
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: J ignition housing and cover plate
Two Wheeled Spares (DK) have got two on eBay, and there's half a dozen in Germany.
Where'd you come off?
Where'd you come off?
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: J ignition housing and cover plate
Thanks Julian, i did look there in the morning but what i saw didnt inspire me. Looking again later was more rewarding so may get some from them or the German source.
It was Nelson at Snetterton, i was compelled to throw it on the floor or T-bone the lad who stopped bolt upright mid corner in front of me.
AL
It was Nelson at Snetterton, i was compelled to throw it on the floor or T-bone the lad who stopped bolt upright mid corner in front of me.
AL
1981 J1
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: J ignition housing and cover plate
Hope you're not hurt, Rob told me you'd come off.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: J ignition housing and cover plate
Got an unpainted housing off a Z1100A shaft I don't need. I'll take a close look at it when I get home but I'm pretty sure it's in good shape.
Probably £30 odd quid posted.
No cover plate though I'm afraid.
Olly
Probably £30 odd quid posted.
No cover plate though I'm afraid.
Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Re: J ignition housing and cover plate
Thanks Julian, bike is repairable, detached clavicle will heal, its the humiliation that stings and lasts
AL
AL
1981 J1
Re: J ignition housing and cover plate
Mr Bump wrote:Got an unpainted housing off a Z1100A shaft I don't need. I'll take a close look at it when I get home but I'm pretty sure it's in good shape.
Probably £30 odd quid posted.
No cover plate though I'm afraid.
Olly
Olly thank you for taking the time to reply. The inner cover sounds great. I will send a pm with a couple of details about the inner cover as it needs to be the version with three fixing points for the timing plate to mount to which i asume will be the same.
I have ordered an outer cover so thank you, that part is under way.
AL
1981 J1
Re: J ignition housing and cover plate
Inner housing arrived today. Thank you very much Olly, it looks great and just the job.
AL
AL
1981 J1
Who is online
Users browsing this forum: No registered users and 29 guests