Evening Gentleman.
Would anybody have a knackered MK2 frame that they would be willing to cut the rear end off so I can save a frame that I have bought.
Many thanks Amigos
Gus
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 MK2 frame rear section.
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Z1000 MK2 frame rear section.
"Set the GRINDER on it"
Re: Z1000 MK2 frame rear section.
I need the same thing to save a z1r frame
Or a talented fabricator
Gus I have a MK2 and a z1rframe that could be used for a template
Or a talented fabricator
Gus I have a MK2 and a z1rframe that could be used for a template
Z900A4, Z1000A1, Z1000ST E1,E2, Z1000Mk2 A3,Z1000H Z1R D1, z1000j3, Z1000P. Z900RS SE,
Z1300 A1,
GPZ1100 Unitrack, GPZ750E, GPZ 750Turbo, GPZ900r A1, A2, A6
ZZR1100 Purple and orange
KE175b, KE175F
along with some lesser makes
Z1300 A1,
GPZ1100 Unitrack, GPZ750E, GPZ 750Turbo, GPZ900r A1, A2, A6
ZZR1100 Purple and orange
KE175b, KE175F
along with some lesser makes
Re: Z1000 MK2 frame rear section.
Hi Harty.
That's good to know, cheers.
Hoping to get a section so I can get my metal guru guy to fit a couple of slugs and weld it up if I can acquire a rear section
Cheers
Gus
That's good to know, cheers.
Hoping to get a section so I can get my metal guru guy to fit a couple of slugs and weld it up if I can acquire a rear section
Cheers
Gus
"Set the GRINDER on it"
Who is online
Users browsing this forum: No registered users and 83 guests