Anyone happen to have a set that they want to part with??
Thanks
Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Keihin CR Special Smoothbores
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Keihin CR Special Smoothbores
paid up member
- RALPHARAMA
- Area Rep.
- Posts: 2752
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Re: Keihin CR Special Smoothbores
Having had my fingers burned by a set of CRs on a mates ELR I would strongly advise against them. Myself and the Dyno guy gave up in the end and fitted a set of 34mm flat slides - worked straight out the box and were straight forward to set up perfectly on the dyno.
CRs - never again. My mate was recommended to have CRs on a forum, probably this one. I have talked to a load of professional tuners since and they all sign from the same hymn sheet! When I told Tim Blakemore what my mate had ordered he warned me of the pain and grief I was about to endure and he wasn't wrong!
Cue the massive torrent of folk telling me I'm wrong
CRs - never again. My mate was recommended to have CRs on a forum, probably this one. I have talked to a load of professional tuners since and they all sign from the same hymn sheet! When I told Tim Blakemore what my mate had ordered he warned me of the pain and grief I was about to endure and he wasn't wrong!
Cue the massive torrent of folk telling me I'm wrong
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Re: Keihin CR Special Smoothbores
RALPHARAMA wrote:
Cue the massive torrent of folk telling me I'm wrong
I have a set and they weren’t that hard to set up
Re: Keihin CR Special Smoothbores
Got crs on two of my bikes, Lawson and endurance bike, never had any problems with them. Worked well from the box.
Rob
Rob
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer, gpz1100b1
Re: Keihin CR Special Smoothbores
Is that 34 mikuni flatslides Ralph?... what was the engine spec?
Rob
Rob
paid up member
- RALPHARAMA
- Area Rep.
- Posts: 2752
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Re: Keihin CR Special Smoothbores
rpeters wrote:Is that 34 mikuni flatslides Ralph?... what was the engine spec?
Rob
Hi Rob. I have fitted RS34s to quite a few bikes from a 1325 with really lumpy cams .... all ran really well from the box. The ELR (1000R2) we fitted the CRs to was stock save a straight through Harris pipe and stock airbox with K&N filter.
I have a set of RS34s on order for my 1075cc A4 with medium lift Kent cams. I just want an easy life. They're also appreciably cheaper than CRs
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Re: Keihin CR Special Smoothbores
Someone I know in Germany has a brand new set he's selling for £800.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: Keihin CR Special Smoothbores
Ok so the RS34s have a larger inlet diameter than the head port inlet so does this not disrupt the airflow, or is it best to fettle out the head ports to the same diameter as the RS34 carbs. Also larger diameter adaptor rubbers, are these easily available?
paid up member
- RALPHARAMA
- Area Rep.
- Posts: 2752
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Re: Keihin CR Special Smoothbores
The RS34s use the same rubbers as the Js which are still available, both new and pattern. Buzzard tells be that it is best to open up the ports to the same diameter as the inside of the rubbers, which I will be doing on my A4.
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Who is online
Users browsing this forum: No registered users and 127 guests