As the title says: Z900 or Z1000 cylinder block wanted. Ideally with undamaged fins. Liner condition and size not important - it will be bored for new pistons. I have seen the eBay offerings, most of which have damaged fins and are overpriced, so I’m not interested in those.
Thanks in advance.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wanted: Z900 or Z1000 Cylinder block
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
Bill Newman
- Custard Cream
- Posts: 539
- Joined: 27th May 2007
- Location: Ipswich
Re: Wanted: Z900 or Z1000 Cylinder block
Give John Browse a call 01978 355556
-
Bill Newman
- Custard Cream
- Posts: 539
- Joined: 27th May 2007
- Location: Ipswich
Re: Wanted: Z900 or Z1000 Cylinder block
steve-g wrote:Give John Browse a call 01978 355556
Done the usual/obvious places, hence the post here.
Re: Wanted: Z900 or Z1000 Cylinder block
I've probably got one I can spare. What size are you boring out to? (As I have quite a few with large overbored liners).
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
-
Bicycle Repairman
- Regular Poster
- Posts: 26
- Joined: 27th Sep 2015
- Location: Essex
Re: Wanted: Z900 or Z1000 Cylinder block
I have one too if you get stuck or another forum member can’t help.
My spare block has been recently vapour blasted. It is a 900 block bored to 1000 by the previous owner. It has the 1000 pistons and a brand new set of rings ready to fit.
My spare block has been recently vapour blasted. It is a 900 block bored to 1000 by the previous owner. It has the 1000 pistons and a brand new set of rings ready to fit.
Re: Wanted: Z900 or Z1000 Cylinder block
Anyone got a single spare liner I could buy. Need just the one 70mm ok
Who is online
Users browsing this forum: No registered users and 94 guests