Page 1 of 1
Wanted: Z900 or Z1000 Cylinder block
Posted: Fri Jan 22, 2021 11:23 am
Author: Bill Newman
As the title says: Z900 or Z1000 cylinder block wanted. Ideally with undamaged fins. Liner condition and size not important - it will be bored for new pistons. I have seen the eBay offerings, most of which have damaged fins and are overpriced, so I’m not interested in those.
Thanks in advance.
Re: Wanted: Z900 or Z1000 Cylinder block
Posted: Fri Jan 22, 2021 2:50 pm
Author: steve-g
Give John Browse a call 01978 355556
Re: Wanted: Z900 or Z1000 Cylinder block
Posted: Sun Jan 24, 2021 9:34 am
Author: Bill Newman
steve-g wrote:Give John Browse a call 01978 355556
Done the usual/obvious places, hence the post here.
Re: Wanted: Z900 or Z1000 Cylinder block
Posted: Sun Jan 24, 2021 11:29 am
Author: Ultim8pc
I've probably got one I can spare. What size are you boring out to? (As I have quite a few with large overbored liners).
Re: Wanted: Z900 or Z1000 Cylinder block
Posted: Sun Jan 24, 2021 12:58 pm
Author: Bicycle Repairman
I have one too if you get stuck or another forum member can’t help.
My spare block has been recently vapour blasted. It is a 900 block bored to 1000 by the previous owner. It has the 1000 pistons and a brand new set of rings ready to fit.
Re: Wanted: Z900 or Z1000 Cylinder block
Posted: Sun Jan 24, 2021 6:52 pm
Author: PJONO
Anyone got a single spare liner I could buy. Need just the one 70mm ok