Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
1100 unitrack
Moderators: paul doran, Taffus, KeithZ1R, chrisu
1100 unitrack
I'm looking for two of the bearing sleeves for the rear suspension rocker arm.They're nla , i could get steel ones made but the originals are case hardened. Cheers.
Re: 1100 unitrack
Hi zippy
I know what you're saying. I encountered the same issue. If you have a lathe yourself or if you know someone who has a lathe you can use a rod of "cemented" steel of 20 mm diameter. The outside of that rod is hardened but the inside of rod can be machined, drilled out in order to make a replacement part.
If you google "cemented steel" you can find a supplier in the UK I guess ...
Good luck
GrtZ
Philippe
I know what you're saying. I encountered the same issue. If you have a lathe yourself or if you know someone who has a lathe you can use a rod of "cemented" steel of 20 mm diameter. The outside of that rod is hardened but the inside of rod can be machined, drilled out in order to make a replacement part.
If you google "cemented steel" you can find a supplier in the UK I guess ...
Good luck
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: 1100 unitrack
Thanks Philippe, can't find anything like that in the UK though.
Re: 1100 unitrack
Think i'm sorted now Gus. Thanks for the offer mate.
Re: 1100 unitrack
"Set the GRINDER on it"
Who is online
Users browsing this forum: No registered users and 97 guests