I'm looking for a z1b z900 rear sprocket carrier spacer.
The middle one between carrier and hub.
Z-power been out of stock for ages.
Anyone got one they could live without please?
Many thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Sprocket carrier spacer Now got one.
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Sprocket carrier spacer Now got one.
Last edited by tim.25 on Wed Mar 17, 2021 4:01 pm, edited 1 time in total.
Z900a4, BMW 1200GS, KTBFFH
Re: Sprocket carrier spacer
are you sure ? .i bought one last week
Re: Sprocket carrier spacer
its just a spacer - easy to make one.
Re: Sprocket carrier spacer
I spaced mine with washers
73 z1, z650c3
ALWAYS LOOK ON THE BRIGHT SIDE OF LIFE
ALWAYS LOOK ON THE BRIGHT SIDE OF LIFE
Re: Sprocket carrier spacer
chrisw1 wrote:are you sure ? .i bought one last week
I called them and as you said the zinc is a bit over so new lot on order.
Z900a4, BMW 1200GS, KTBFFH
Re: Sprocket carrier spacer
Do you know the dimensions, I may have one.
Re: Sprocket carrier spacer
walshyco wrote:Do you know the dimensions, I may have one.
I'm sorry Sean I don't I'm afraid.
All I can say is the larger dia fits into the sprocket carrier bearing and butts up on the flange.
I don't know The overall length.
Cheers
Tim
Z900a4, BMW 1200GS, KTBFFH
Re: Sprocket carrier spacer
walshyco wrote:Do you know the dimensions
dia 20.1 x 40 x 11 wide
Re: Sprocket carrier spacer
z2.john wrote:walshyco wrote:Do you know the dimensions
dia 20.1 x 40 x 11 wide
I think that's the outer one, it's the inner one between carrier and drum need.
Z900a4, BMW 1200GS, KTBFFH
Re: Sprocket carrier spacer
tim.25 wrote:z2.john wrote:walshyco wrote:Do you know the dimensions
dia 20.1 x 40 x 11 wide
I think that's the outer one, it's the inner one between carrier and drum need.
Ahhh, sorry...........I assume you want 42036-015. At least Z-power website provides a drawing with dimensions should you have access to a lathe
Re: Sprocket carrier spacer
https://www.z-power.co.uk/rear-wheel-sl ... -1972-1976
I think it’s this one, I can’t find the dimensions for it anywhere, as I said I may have one if you can find the dimensions.
I think it’s this one, I can’t find the dimensions for it anywhere, as I said I may have one if you can find the dimensions.
Re: Sprocket carrier spacer
walshyco wrote:https://www.z-power.co.uk/rear-wheel-sleeve-rr-hub-coupling-spacer-z1z900-1972-1976
I think it’s this one, I can’t find the dimensions for it anywhere, as I said I may have one if you can find the dimensions.
Yes that's the one, if you click on the link and go to the third picture the dimensions are there.
Z900a4, BMW 1200GS, KTBFFH
Re: Sprocket carrier spacer
Sorry mate I thought you were after the spacer between the sprocket and carrier when using an o ring chain but the good news is I have wot you want and it's a genuine part, pm me your address and I'll stick it in the post
73 z1, z650c3
ALWAYS LOOK ON THE BRIGHT SIDE OF LIFE
ALWAYS LOOK ON THE BRIGHT SIDE OF LIFE
Re: Sprocket carrier spacer
C Martin wrote:Sorry mate I thought you were after the spacer between the sprocket and carrier when using an o ring chain but the good news is I have wot you want and it's a genuine part, pm me your address and I'll stick it in the postIMG_20210313_223146.jpgIMG_20210313_223206.jpg
Brilliant, thank you PM sent.
Z900a4, BMW 1200GS, KTBFFH
Who is online
Users browsing this forum: No registered users and 105 guests