Page 1 of 1
Sprocket carrier spacer Now got one.
Posted: Fri Mar 05, 2021 5:41 pm
Author: tim.25
I'm looking for a z1b z900 rear sprocket carrier spacer.
The middle one between carrier and hub.
Z-power been out of stock for ages.
Anyone got one they could live without please?
Many thanks
Re: Sprocket carrier spacer
Posted: Fri Mar 05, 2021 6:38 pm
Author: chrisw1
are you sure ? .i bought one last week
Re: Sprocket carrier spacer
Posted: Sun Mar 07, 2021 3:51 pm
Author: chrisu
its just a spacer - easy to make one.
Re: Sprocket carrier spacer
Posted: Sun Mar 07, 2021 6:54 pm
Author: C Martin
I spaced mine with washers
Re: Sprocket carrier spacer
Posted: Mon Mar 08, 2021 6:59 pm
Author: tim.25
chrisw1 wrote:are you sure ? .i bought one last week
I called them and as you said the zinc is a bit over so new lot on order.
Re: Sprocket carrier spacer
Posted: Mon Mar 08, 2021 9:09 pm
Author: walshyco
Do you know the dimensions, I may have one.
Re: Sprocket carrier spacer
Posted: Tue Mar 09, 2021 6:13 am
Author: tim.25
walshyco wrote:Do you know the dimensions, I may have one.
I'm sorry Sean I don't I'm afraid.
All I can say is the larger dia fits into the sprocket carrier bearing and butts up on the flange.
I don't know The overall length.
Cheers
Tim
Re: Sprocket carrier spacer
Posted: Tue Mar 09, 2021 7:10 am
Author: z2.john
walshyco wrote:Do you know the dimensions
dia 20.1 x 40 x 11 wide
Re: Sprocket carrier spacer
Posted: Tue Mar 09, 2021 9:49 am
Author: tim.25
z2.john wrote:walshyco wrote:Do you know the dimensions
dia 20.1 x 40 x 11 wide
I think that's the outer one, it's the inner one between carrier and drum need.
Re: Sprocket carrier spacer
Posted: Tue Mar 09, 2021 11:59 am
Author: z2.john
tim.25 wrote:z2.john wrote:walshyco wrote:Do you know the dimensions
dia 20.1 x 40 x 11 wide
I think that's the outer one, it's the inner one between carrier and drum need.
Ahhh, sorry...........I assume you want 42036-015. At least Z-power website provides a drawing with dimensions should you have access to a lathe
Re: Sprocket carrier spacer
Posted: Wed Mar 10, 2021 8:40 pm
Author: walshyco
https://www.z-power.co.uk/rear-wheel-sl ... -1972-1976I think it’s this one, I can’t find the dimensions for it anywhere, as I said I may have one if you can find the dimensions.
Re: Sprocket carrier spacer
Posted: Thu Mar 11, 2021 5:26 am
Author: tim.25
walshyco wrote:https://www.z-power.co.uk/rear-wheel-sleeve-rr-hub-coupling-spacer-z1z900-1972-1976
I think it’s this one, I can’t find the dimensions for it anywhere, as I said I may have one if you can find the dimensions.
Yes that's the one, if you click on the link and go to the third picture the dimensions are there.
Re: Sprocket carrier spacer
Posted: Sat Mar 13, 2021 10:47 pm
Author: C Martin
Sorry mate I thought you were after the spacer between the sprocket and carrier when using an o ring chain but the good news is I have wot you want and it's a genuine part, pm me your address and I'll stick it in the post
Re: Sprocket carrier spacer
Posted: Sun Mar 14, 2021 6:26 am
Author: tim.25
C Martin wrote:Sorry mate I thought you were after the spacer between the sprocket and carrier when using an o ring chain but the good news is I have wot you want and it's a genuine part, pm me your address and I'll stick it in the postIMG_20210313_223146.jpgIMG_20210313_223206.jpg
Brilliant, thank you PM sent.